Patton electronic SmartNode 4110 Series manual Name sys#no terminal idle-time

SmartWare Software Configuration Guide7 • Basic system management

Step	Command	Purpose
2	[name] (sys)#[no] terminal idle-time-	After 30 minutes without user input, a terminal session
	logout	is automatically closed. If longer session periods are
		required (logging/debugging) this command allows
		to increase the session timeout, or to disable it com-
		pletely.
3	[name] (sys)#terminal more	Enables pausing of display for commands which pro-
		duce more output than the current terminal window
		can display at once.
4	[name] (sys)#terminal width	Configures the terminal width.

When there are many VoIP units in the same location, use this command to flash all the LED’s on a specific unit for a specified period of time. This makes identification of the physical unit very easy.

Step	Command	Purpose
1	[name] #blink <seconds>	Enter an integer for the period of time you want the
		LED’s to flash on the physical unit.

Basic system management configuration task list 101