SmartWare Software Configuration Guide25 • SNMP configuration

Mode: Administrator execution

Step

Command

Purpose

 

 

 

1

node(cfg)#system contact name

Sets the contact persons name

 

 

 

2

node(cfg)#system location location

Sets the system location

 

 

 

3

node(cfg)#system hostname hostname

Sets the system hostname and command line prompt

 

 

 

If any of the command options name, location, or hostname has to be formed out of more than one word, the information is put in “double quotes”.

Note Enter an empty string “” to get rid of any of the system settings.

The MIB-II system group values are accessible for reading and writing via the following SNMP objects:

.iso.org.dod.internet.mgmt.mib-2.system.sysContact

.iso.org.dod.internet.mgmt.mib-2.system.sysName

.iso.org.dod.internet.mgmt.mib-2.system.sysLocation

After setting these values according to 1 through 3 any SNMP MIB browser application should read the values using a get or get-nextcommand as shown in figure 40.

The procedure to use the SNMP MIB browser is:

Enter the community string public into the Community field in the upper right corner of the window. For safety reasons each entered character is displayed with a “*”.

Access any of the supported MIB system group object by using the GetNext button from the button bar of the window.

Setting basic system information

271

Page 271
Image 271
Patton electronic SmartNode 4110 Series manual 271