Patton electronic SmartNode 4110 Series Registration outbound face, Mode Registration outbound

SmartWare Software Configuration Guide 51 • Location Service

Registration outbound face

The registration outbound face is used to register an identity on an external registrar. Then, the registrar for- wards calls from the registered identity to your identity.

Mode: Identity

	Step	Command	Purpose
1	[node](identity)[name]# [no] registration	Adds a new face to the identity. The no form of the
		outbound	command removes an existing face with all content
			in it.
Mode: Registration outbound
	Step	Command	Purpose

1[node](regout)# [no] register [autonone] Enables registration with auto or disables registra- tion explicitly with none.

Mode: Registration outbound

	Step	Command	Purpose
1	[node](regout)# [no] registrar <host>	Configures the address of the registrar to send
		[<port>]	your register requests. When no registrar is config-
			ured, the register requests are sent to the first
			domain entry in the location-service.
Mode: Registration outbound
	Step	Command	Purpose
	1	[node](regout)# [no] lifetime <seconds>	Configures the desired lifetime of the registration.
			When no lifetime is configured the desired lifetime
			is set to 3600 seconds.
Mode: Registration outbound
	Step	Command	Purpose
	1	[node](regout)# [no] retry-timeout (on-cli-	Configures the time to wait after a failed registra-
		ent-erroron-sysstem-erroron-server-	tion according to three different error categories.
		error) <seconds>	After this time we begin to register from new. If no
			retry-timeout is configured the retry-timeout is set to
			10 seconds.

Location Service configuration task list 613