Patton electronic SmartNode 4110 Series manual Deleting mapping tables

SmartWare Software Configuration Guide 40 • Call router configuration

node(cfg)#context cs

node(ctx-cs)[switch]#mapping-table called-type-of-number to called-type-of-number

SET-INT

node(rt-tab)[SET-INT]#map default to international

Any called party number type matches the default entry. Note that the input-type of the table does not matter when the mapping table contains only the default entry. Anyway an input-type must be specified when creat- ing the mapping table.

The output (called party number type) is international.

The called party number type is set to international.

Example: Mapping table to replace called party numbers (translation table)

node(cfg)#context cs

node(ctx-cs)[switch]#mapping-table called-e164 to called-e164 TRANS node(rt-tab)[TRANS]#map 550 to 250

node(rt-tab)[TRANS]#map 551 to 251 node(rt-tab)[TRANS]#map 552 to 252 node(rt-tab)[TRANS]#map 553 to 253 node(rt-tab)[TRANS]#map 554 to 254 node(rt-tab)[TRANS]#map 555 to 255 node(rt-tab)[TRANS]#map 556 to 256 node(rt-tab)[TRANS]#map 557 to 257 node(rt-tab)[TRANS]#map 558 to 258 node(rt-tab)[TRANS]#map 559 to 259

Note The translation table above can be reduced using regular expressions.

node(cfg)#context cs

node(ctx-cs)[switch]#mapping-table called-e164 to called-e164 TRANS node(rt-tab)[TRANS]#map 55(.) to 25\1

Deleting mapping tables

To remove individual mapping tables you can use the no form of the mapping table command. Alternatively you can remove specific entries of a mapping table by entering the mapping table configuration mode and use the no form of the map command.

Procedure: To delete an entry from a mapping table

Mode: Context CS

Step	Command	Purpose
1	node(ctx-cs)[switch]#mapping-table	Enter the mapping table from which you want to remove an
	table-name	entry.
		Note: You do not have to enter the type of the table when
		just entering it. The type must only be specified when creating
		a table.
2	node(map-tab)[table-name]#no map	Remove the entry with the specified key.
	key
3		Repeat Step 2 to remove additional entries.

Call router configuration task list 489