Patton electronic SmartNode 4110 Series manual No-user-responding Drop original call

SmartWare Software Configuration Guide 40 • Call router configuration

Table 21. Hunt group drop causes (Continued)

		Default Behavior
Class	Cause	of the Hunt	Description
		Group Service
Normal Event	no-user-responding	Drop original call	The connection fails because the destina-
(Cont.)			tion does not respond to the call. This
			cause is used when a user does not
			respond to a call establishment message
			with either an alerting or a connect indica-
			tion with the prescribed period of time
			allocated.
	no-answer-from-user	Drop original call	The destination responds to the connection
			request but fails to complete the connec-
			tion within the prescribed time. This cause
			is used when the user has provided an
			alerting indication but has not provided a
			connect indication within a prescribed
			period of time.
	subscriber-absent	Drop original call	The remote device you attempted to reach
			is unavailable and has disconnected from
			the network.
	call-rejected	Drop original call	The destination can accept the call but
			rejects it for an unknown reason. This
			cause indicates that the equipment send-
			ing this cause does not wish to accept this
			call, although it could have accepted the
			call because the equipment sending this
			cause is neither busy nor incompatible.
	number-changed	Drop original call	The number used to set up the call is not
			assigned to a system. This cause is
			returned to a calling user when the called
			party number indicated by the calling user
			is no longer assigned.
	non-selected-user-clear-	Drop original call	The destination can accept the call but
	ing		rejects it because it is not assigned to the
			user.
	destination-out-of-order	Drop original call	The destination cannot be reached
			because of an interface malfunction, and
			a signaling message cannot be delivered.
			This can be a temporary condition, but it
			could last for an extended period.
	invalid-number-format	Drop original call	The connection fails because the destina-
			tion address is presented in an unrecog-
			nizable format, or the destination address
			is incomplete.
	facility-rejected	Drop original call	The network cannot provide the facility
			requested by the user.

Call router configuration task list 501