Patton electronic SmartNode 4110 Series manual Configuring the local and remote PPP Mrru, Default

SmartWare Software Configuration Guide 30 • PPP configuration

Configuring the local and remote PPP MRRU

The PPP Maximum Receive Reconstructed Unit (MRRU) denotes the maximum reassembled MRU we are able to receive above the multi-link PPP protocol, i.e. this is the MRU after reassembling frames from individ- ual links inside a multi-link bundle. The valid range and default value of MRRU can be configured in the PPP profile.

Mode: profile ppp

Step	Command	Purpose
1	[name] (pf-ppp)[profile]# mrru [min	Configures the minimum, maximum and default
	<min>] [max <max>] [default	value of the local MRRU. The configured range
	<default>]	(min..max) is forced during PPP LCP negotiation,
		while the default value is offered first. Note that the
		MRRU option is only offered when multi-link is
		enabled.
		The default minimum value is 68.
		The default maximum value is 1920.
		The default default value is 1500.
2	[name] (pf-ppp)[profile]# mtru [min	Configures the minimum, maximum and default
	<min>] [max <max>] [default	value of the remote MRRU, i.e. the MRRU of the
	<default>]	remote side that we are willing to accept. The con-
		figured range (min..max) is forced during PPP LCP
		negotiation, while the default value is used when
		not offered.
		The default minimum value is 68.
		The default maximum value is 1920.
		The default default value is 1500.

PPP configuration task list 323