Patton electronic SmartNode 4110 Series manual Mode profile service-policy/profile

SmartWare Software Configuration Guide13 • Link scheduler configuration

Mode: profile service-policy/profile

Command	Purpose
[name] (pf-srvp)[<name>]# [no] map packet-size	Assigns IP packets of a predefined or speci-
{routed-voice routed-voice-encrypted [<lower-size>	fied range to a traffic-class. To name a spe-
<upper-size>] } traffic-class<traffic-class-name>	cific size, configure lower-range and upper-
	range with the same value.

The following procedure guides through the steps required for creating, configuring and using service policy profiles on a WAN link that has an upstream and downstream capacity of 256kBit/s and is based on ADSL technology. The access device must be able to process the RTP traffic generated by a VoIP Phone located in the LAN like the local generated RTP stream.

Mode: Configure

Step	Command	Purpose
1	[name] (cfg)# profile service-policy <name-	Creates a new service policy profile will be con-
	out>	figured for the uplink.
2	[name] (pf-srvp)[<name-out>]# rate-limit 256	Configures the uplink capacity.
	atm-modem
3	[name] (pf-srvp)[<name-out>]# map packet-	Specifies that routed voice traffic will be pro-
	size routed-voice traffic-class local-voice	cessed like local generated voice traffic.
4	[name] (pf-srvp)[<name-out>]# source traffic-	Enters traffic-class configuration mode
	class local-voice
5	[name] (src)[local-v~]# priority	Specifies that local-voice has priority. Because
		route-voice is mapped to local-voice, also routed-
		voice has priority.
6	[name] (src)[local-v~]# profile service-policy	Creates a new service policy profile will be con-
	<name-in>	figured for the downlink.
7	[name] (pf-srvp)[<name-in>]# rate-limit 256	Configures the downlink capacity and sets a
	atm-modem voice-margin 80	voice-margin of 80kBit/s
8	[name] (pf-srvp)[<name-in>]# map packet-	Specifies that routed voice traffic will be pro-
	size routed-voice traffic-class local-voice	cessed like local generated voice traffic.
9	[name] (pf-srvp)[<name-in>]# source traffic-	Enters traffic-class configuration mode
	class local-voice
10	[name] (src)[local-v~]# priority	Specifies that local-voice has priority. Because
		route-voice is mapped to local-voice, also routed-
		voice has priority.
11	[name] (src)[local-v~]# context ip	Changes to IP configuration mode
12	[name] (ctx-ip)[router]# interface <if-wan>	Enters WAN interface configuration mode
13	[name] (if-ip)[<if-wan>]# use profile service-	Assigns the downlink profile on the WAN inter-
	policy <name-in> in	face.
14	[name] (if-ip)[<if-wan>]# use profile service-	Assigns the uplink profile on the WAN interface.
	policy <name-out> out

Link scheduler configuration task list 166