Patton electronic SmartNode 4110 Series manual Implemented, Invalid Message

SmartWare Software Configuration Guide 40 • Call router configuration

Table 21. Hunt group drop causes (Continued)

		Default Behavior
Class	Cause	of the Hunt	Description
		Group Service
Service or	bearer-capability-not-	Drop original call	The network normally provides the
Option Not	available		requested bearer capability, but it is
Available			unavailable at the present time. This can
(Cont.)			be due to a temporary network problem
			or subscription problem.
	service-or-option-not-	Drop original call	The network or remote equipment cannot
	available		provide the requested service option for
			an unspecified reason. This can be a sub-
			scription problem.
Service or	bearer-capability-not-	Drop original call	The network cannot provide the bearer
Option Not	implemented		capability requested by the user.
Implemented	channel-type-not-imple-	Drop original call	The network or the destination equipment
	mented		does not support the requested channel
			type.
	facility-not-implemented	Drop original call	The remote equipment does not support
			the requested supplementary service.
	only-restricted-digital-	Drop original call	The network cannot provide unrestricted
	available		digital information bearer capability. This
			cause indicates that a device has
			requested an unrestricted bearer service
			but the equipment sending this cause only
			supports the restricted version of the
			requested bearer capability.
	service-or-option-not-	Drop original call	The network or remote equipment cannot
	implemented		provide the requested service option for
			an unspecified reason. This can be a sub-
			scription problem.
Invalid Message	invalid-call-reference	Drop original call	The remote equipment receives a call with
			a call reference value that is not currently
			in use.
	channel-does-not-exist	Drop original call	The receiving equipment is requested to
			use a channel that is not activated on the
			interface for calls. This cause indicates that
			the equipment sending this cause has
			received a request to use a channel not
			activated on the interface for a call.
	call-identity-does-not-	Drop original call	This cause indicates that a call resume has
	exist		been attempted with a call identity, which
			differs from that in use for any presently
			suspended call.

Call router configuration task list 503