Patton electronic SmartNode 4110 Series Procedure To configure a tone-set profile Mode Configure

SmartWare Software Configuration Guide 42 • Tone configuration

Procedure: To configure a tone-set profile

Mode: Configure

Step	Command	Purpose
1	node(cfg)#profile call-progress-tone	Creates a call-progress-tone profile with name
	name	name and enters call-progress-tone configura-
		tion mode.
2	node(pf-callp)[name]#play duration	Defines a tone with duration duration, fre-
	frequency1 level1 [frequency2 level2]	quency frequency1 and volume level1. If a sec-
		ond frequency is defined both frequencies are
		played in parallel and for the same duration
3	node(pf-callp)[name]#pause duration	Defines a pause of duration milliseconds
4	node(pf-callp)[name]#...	Repeat step 2 and/or step 3 to define a tone
		sequence. Always when you enter a play or
		pause command, it is appended to the
		already existing tone.
5	node(pf-callp)[name]#flush-play-list	Resets the tone cadence. Same as deleting
		and re-creating the tone.

Example: Define the Belgian special information tone

The first line defines the first element of the tone: 330ms of 950Hz at –4dB. The second line the element that

is played when the first element has finished: 330ms of 144Hz at –4dB, and so on. The last line defines a pause of 1 second after the three tones. The cadence is repeated infinitely.

node(cfg)#profile call-progress-tone belgianSpec node(pf-callp)[belgian~]#play 330 950 -4 node(pf-callp)[belgian~]#play 330 1400 -4 node(pf-callp)[belgian~]#play 330 1800 -4 node(pf-callp)[belgian~]#pause 1000

Tones and pauses can be arbitrarily sequenced up to a number of 10 elements per call-progress-tone. The default call-progress-tone is an empty tone. The total number of different play elements across all configured call-progress-tones must not exceed 15 (an error is thrown if it does). If the call-progress-tone consists of only one element, this element has infinite duration. The duration parameter is ignored in this case.

Configure tone-set profiles

A tone-set profile maps one call-progress-tone profile to each internal call-progress-tone. A tone-set profile typ- ically includes all the call-progress-tones for one country.

Procedure: To configure a tone-set profile

Mode: Configure

Step

1

Command	Purpose
node(cfg)#profile tone-set name	Creates tone-set name and enters tone-set pro-
	file configuration mode.

Tone configuration task list 532