Patton electronic SmartNode 4110 Series manual PRI Configuration Examples

SmartWare Software Configuration Guide16 • PRI port configuration

Mode: Operator execution

	Step	Command	Purpose
1	[name]#[no] debug hw-type	Enables/Disables the PRI event/error monitor for the
		[ ( [<slot> [<port>] ] ) [ [event]	device a slot or a port.
		[error] ] ]	Examples:
			1)[no] debug e1t1
			Enables/Disables the event and the error monitor for
			all e1t1 ports of the device.
			2)[no] debug e1 event
			Enables/Disables the event monitor for all e1 ports
			of the device.
			3)[no] debug t1 error
			Enables/Disables the error monitor for all t1 ports of
			the device.
			4)[no] debug e1 3
			Enables/Disables the event and error monitor for all
			e1 ports on slot 3.
			5)[no] debug e1t1 1 event
			Enables/Disables the event monitor for all e1t1
			ports on slot 1.
			6)[no] debug t1 2 error
			Enables/Disables the error monitor for all t1 ports
			on slot 2.
			7)[no] debug t1 0 0
			Enables/Disables the event and error monitor for the
			t1 port 0 on slot 0.
			8)[no] debug e1 1 0 event
			Enables/Disables the event monitor for the e1 port 0
			on slot 1.
			9)[no] debug e1t1 2 0 error
			Enables/Disables the error monitor for the e1t1 port
			0 on slot 2.
Mode: Operator execution
	Step	Command	Purpose
1	[name]#show port hw-type	Prints information about the specified port with a
		[ [<slot> <port>] [detail <level>] ]	given detail level.

PRI Configuration Examples

Here is a group of seven configuration examples.

•Example 1: ISDN

•Example 2: RBS without a channel-group

•Example 3: RBS with a channel-group

PRI port configuration task list 201