Patton electronic SmartNode 4110 Series manual Nodepf-acl name#permit icmp src src-wildcard any

SmartWare Software Configuration Guide 24 • Access control list configuration

Adding an ICMP filter rule to the current access control list profile

The command permit or deny are used to define an ICMP filter rule. Each ICMP filter rule represents an ICMP access of control list entry.

This procedure describes how to create an ICMP access control list entry that permits access

Mode: Profile access control list

Step	Command	Purpose
1	node(pf-acl)[name]#permit icmp {src src-wildcard any	Creates an ICMP access of con-
	host src} {dest dest-wildcard any host dest} [msg name	trol list entry that permits access
	type type type type code code] [cos group]	defined according to the com-
		mand options

This procedure describes how to create an ICMP access control list entry that denies access Mode: Profile access control list

Step	Command	Purpose
1	node(pf-acl)[name]#deny icmp {src src-wildcard	Creates an ICMP access of control list
	any host src} {dest dest-wildcard any host dest}	entry that denies access defined accord-
	[msg name type type type type code code] [cos	ing to the command options
	group]

Access control list configuration task list 259