Patton electronic SmartNode 4110 Series manual Deleting routing tables, Resulting running-config is

SmartWare Software Configuration Guide 40 • Call router configuration

node(rt-tab)[HOLIDAY~]#route default dest-interface IF-VOIP

Deleting routing tables

To remove individual routing tables you can use the no form of the routing table command. Alternatively you can remove specific entries of a routing table by entering the routing table configuration mode and use the no form of the route command.

Procedure: To delete an entry from a routing table

Mode: Context CS

Step	Command	Purpose
1	node(ctx-cs)[switch]#routing-table	Enter the routing table from which you want to remove an
	table-name	entry.
		Note: You do not have to enter the type of the table when
		just entering it. The type must only be specified when creating
		a table.
2	node(rt-tab)[table-name]#no route key	Remove the entry with the specified key.
3		Repeat Step 2 to remove additional entries.

Example: Remove entries from a routing table

The running-config shows the following table:

routing-table called-e164 MY-TABLE route 10 dest-interface IF1 route 11 dest-interface IF2 route 12 dest-interface IF3 route default dest-interface IF4

To remove the first two entries from the table enter the following commands:

node(cfg)#context cs node(ctx-cs)[switch]#routing-table MY-TABLE node(rt-tab)[MY-TABLE]#no route 10 node(rt-tab)[MY-TABLE]#no route 11

The resulting running-config is:

routing-table called-e164 MY-TABLE route 12 dest-interface IF3 route default dest-interface IF4

Procedure: To delete an entire routing table

Call router configuration task list 480