Patton electronic SmartNode 4110 Series manual Configuring basic DynDNS settings, Word

SmartWare Software Configuration Guide 29 • DynDNS configuration

Configuring basic DynDNS settings

The following procedure describes the steps necessary to enable the DynDNS feature.

Mode: DynDNS

Step	Command	Purpose
1	node(dyndns)#authentication user pass-	Defines the authentication credentials of your
	word	DynDNS account
2	node(dyndns)#service	Defines the DynDNS service to use
	{dynamicstaticcustom}
3	node(dyndns)#hostname name	Defines the hostname that will be assigned to the
		SmartNode

Example: Configuring DynDNS

The following example shows the necessary steps required for a basic working configuration of the DynDNS client.

node>enable

node#configure node(cfg)#context ip node(ctx-ip)[router]#dyndns node(dyndns)#authentication Bob 245gf46te node(dyndns)#service dynamic node(dyndns)#hostname myhostname.dyndns.org node(dyndns)#observe eth1

Configuring the DynDNS server

A DynDNS server other than “dyndns.org” can be configured in case you or your provider runs an own DynDNS server.

Mode: context cs/dyndns

Step Command Purpose

1[name](dyndns)# server [<server- Set the DynDNS server name. The default value is

name>] “dyndns.org”.

DynDNS configuration task list 310