Patton electronic SmartNode 4110 Series manual Yes, True, 123#

SmartWare Software Configuration Guide 40 • Call router configuration

The following table shows the different digit-collection timeout configurations and their effect on a T-termi- nated route when the digit-collection timeout elapses. Important settings are marked bold.

Digit Collection Timeout				Ingress Properties		Egress Properties (Result
	Configuration						of call-routing)
Timeout	append-	set-address-	called-e164		Address-	called-e164		Address-
	terminating-	complete-			Complete			Complete
	char	indication			Indication			Indication
no	no	no	123		false	no call
					true
		yes			false
					true
	yes	no			false
					true
		yes			false
					true
yes	no	no			false	123		false
					true			true
		yes			false			true
					true			true
	yes	no			false	123#		false
					true			true
		yes			false			true
					true			true

The command digit-collectionterminating-char <char> has been extended with two optional arguments that specify whether the terminating-character is re-appended or the address-complete indication is set when a digit-collection timeout is stopped by the user sending the terminating-character. The new command syntax is:

[no] digit-collection terminating-char <char> [append-terminating-char] [set-address-complete-indication]

The extensions configure what action(s) shall be performed when the digit-collection timeout is stopped by the reception of a terminating-character. Normally, without specifying an action, the received terminating-charac- ter is removed from the called-party number. The append-terminating-charaction re-appends the terminat- ing-character. The set-address-complete-indicationaction sets the address-complete indication. Whether or

Call router configuration task list 494