SmartWare Software Configuration Guide

40 • Call router configuration

 

 

The call router can route calls according to the following information transfer capabilities. These values beside default can be used for the key parameter to create a routing table entry:

speech—Voice terminals (Telephones)

unrestricted-digital—Unrestricted digital information (64kBit/s)

restricted-digital—Restricted digital information (64kBit/s)

3k1-audio—Transparent 3.1kHz audio channel. This is the default value set by interfaces that do not sup- port the ITC property.

7k-audio—Transparent 7.1kHz audio channel

video—Video conference terminals

Example: Information transfer capability routing table

The following example creates an itc routing table that routes all unrestricted digital calls to the interface IF- ACCESS, all 7kHz audio calls to the interface IF-LOCAL-BREAKOUT, all video calls to the interface IF- ACCESS and all other calls to the interface IF-VOIP-CARRIER-A.

node(cfg)#context cs node(ctx-cs)[switch]#routing-table itc ITC

node(rt-tab)[ITC]#route unrestricted-digital dest-interface IF-ACCESS node(rt-tab)[ITC]#route 7k-audio dest-interface IF-LOCAL-BREAKOUT node(rt-tab)[ITC]#route video dest-interface IF-ACCESS node(rt-tab)[ITC]#route default dest-interface IF-VOIP-CARRIER-A

Call-router support for redirecting number and redirect reason

The call.router can be used to manipulate and make routing decisions depending on the call-control redirect- ing number and redirect reason properties. The following command creates a call-router routing-table, which uses the redirecting number for routing decisions. The contents of the routing table are the same as for any other E.164 number based call-router routing table.

Mode: context cs

Step

Command

Purpose

 

 

 

 

 

1

[name] (ctx-cs)[router]# routing-table call-

Creates a redirecting number routing table.

 

ing-redir-e164 <table-name>

 

 

 

 

The following command creates a redirect-reason call-router routing-table. Possible reason values for routing decisions are:

cd: Call deflection

cfb: Call forwarding on busy

cfd: Call forwarding by called DTE

cfnr: Call forwarding on no reply

cfu: Call forwarding unconditional

ooo: Called DTE out of order

Call router configuration task list

478

Page 478
Image 478
Patton electronic SmartNode 4110 Series manual 478