Patton electronic SmartNode 4110 Series manual CS context and call router elements

SmartWare Software Configuration Guide 40 • Call router configuration

Figure 74 shows the corresponding CS Context and call router elements in node A:

	Context
interface isdn IF-PBX-A
	Call Router
	MAP-
	CAC-
SVC-	APPLE
FALL	MAP-
BACK	CAC-
	ORANGE
TAB-	TAB-
ISDN-	DEST-
SERVICE	A

interface isdn IF-LOCAL-BREAKOUT

interface h323 IF-NODE-B

MAP-

CAC-

MELON

interface sip IF-NODE-C

Figure 74. CS context and call router elements

We assume that the CS interfaces have already been created and configured. So we can start directly with the call router elements.

Since the command sequence is quite long it is useful to create the configuration offline and download it using TFTP.

Note In the following lines the prompt is omitted as in a configuration file and for better readability.

#-------------------------------------------------------------

# Call Router Config File

#-------------------------------------------------------------

context cs switch

#

#Hunt-group service "SVC-FALLBACK" to catch VoIP network errors

service hunt-group SVC-FALLBACK no cyclic

timeout 6

route call 1 dest-table ISDN-SERVICE route call 2 dest-interface LOCAL-BREAKOUT

Call router configuration task list 519