Patton electronic SmartNode 4110 Series manual Displaying IPsec configuration information

SmartWare Software Configuration Guide 32 • VPN configuration

Configuration of an IP interface and the IP router for IPsec

The IP interface that provides connectivity to the IPsec peer, must now activate the outgoing ACL profile con- figured in the previous section. Furthermore, the IP router must have a route for the remote network that points to the respective IP interface.

Procedure: To activate the outgoing ACL profile and to establish the necessary route

Mode: Configure

Step	Command	Purpose
1	node(cfg)#context ip router	Enter IP context
2	node(ctx-ip)[router]#interface if-name	Create/enter the IP interface if-name
3	node(if-ip)[if-name]# use profile acl	Activate the outgoing ACL profile name
	name out
4	node(if-ip)[if-name]#context ip router	Enter IP context
5	node(ctx-ip)[router]#route remote-net-	Creates a route for the remote network that
optional	work-address remote-network-mask if-name 0	points the above IP interface if-name
		You can omit this setting if the default route
		already points to this IP interface or to a next hub
		reachable via this IP interface, and if there is no
		other route.
		Make also sure that the IP router knows how to
		reach the peer of the secured communication.
		Usually, a default route does this job.

Example: Activate outgoing ACL and establish route

The following example configures an outgoing ACL profile that interconnects the two private networks 192.168.1/24 and 172.16/16.

node(cfg)#context ip router node(ctx-ip)[router]#interface WAN node(if-ip)[WAN]#use profile acl VPN_Out out node(if-ip)[WAN]#context ip router node(ctx-ip)[router]#route 172.16.0.0 255.255.0.0 WAN 0

Displaying IPsec configuration information

This section shows how to display and verify the IPsec configuration information.

Procedure: To display IPsec configuration information

Mode: Configure

Step	Command	Purpose
1	node(cfg)#show profile ipsec-trans-	Displays all IPsec transformation profiles
optional	form
2	node(cfg)#show profile ipsec-policy-	Displays all IPsec policy profiles
optional	manual

VPN configuration task list 368