Patton electronic SmartNode 4110 Series manual 450

SmartWare Software Configuration Guide 39 • SIP interface configuration

Transmit Direction. For enabling sending of the Diversion Header, an outgoing address translation expres- sion must be configured on the sip interface. This expression specifies how to create the Diversion URI of the header. As the User Part of the URI, the Calling Redirecting number will always be taken. The user must con- figure the Host Part that is set per default to none. Setting the Host Part to none disables transmission of the Diversion Header.

Mode: Interface SIP

Step

Command Purpose

1

[name] (if-sip)[interface]#address-transla- tion outgoing-call diversion-header host-part {call default-server domain fix interface none}

Enables or disables sending of the Diversion Header and specifies the Host Part of the URI.

•call: If available, the Host Part of the call- ing from-header will be taken else the local ip address.

•default-server:The ip address of the configured default-server will be taken.

•domain: The configured domain name will be taken.

•fix: Allows to specify a user configured Host Part.

•interface: The local ip address will be taken.

•none: Disables sending of the Diversion Header.

Receive Direction. For receiving of the Diversion Header, an incoming address translation expression must be configured on the sip interface. Because several methods for transmitting redirecting information are available, this expression specifies that they must be taken from the Diversion Header when providing them to the call control.

Mode: Interface SIP

Step	Command	Purpose
1	[name] (if-sip)[interface]#address-transla-	Enables or disables extracting of the redirec-
	tion incoming-call calling-redir diver-	tion information from the Diversion Header.
	sion-header

SIP interface configuration task list 450