Patton electronic SmartNode 4110 Series manual Sets the display name of the called

SmartWare Software Configuration Guide 40 • Call router configuration

Table 20. Mapping table types (Continued)

Type	Description Input-Type	Description Output-Type
called-name	Selects an entry based on the display name	Sets the display name of the called
	of the called party.	party.
calling-name	Selects an entry based on the display name	Sets the display name of the calling
	of the calling party.	party.
name	If the output-type is also a generic kind of	If the input-type is also a generic kind of
	property, this mapping table is applied to	property, this mapping table is applied
	both, this calling-name and the called-	to both, the calling-name and the called-
	name.	name property.
called-ip	Selects an entry based on the remote sig-	Sets the remote IP address of the destina-
	naling IP address of the destination VoIP	tion VoIP peer.
	peer.
calling-ip	Selects an entry based on the remote sig-	Sets the remote IP address of the origina-
	naling IP address of the origination VoIP	tion VoIP peer.
	peer.
ip	If the output-type is also a generic kind of	If the input-type is also a generic kind of
	property, this mapping table is applied to	property, this mapping table is applied
	both, this calling-ip and the called-ip.	to both, the calling-ip and the called-ip
		property.
calling-pi	Selects an entry based on the presentation	Sets the presentation indicator.
	indicator.
calling-si	Selects an entry based on the screening	Sets the screening indicator.
	indicator.
itc	Selects an entry based on the information	Sets the information transfer capability.
	transfer capability (bearer capability) to
	distinguish speech from data calls.
time	Route calls based on the current time of	Cannot be set.
	day.
date	Route calls based on the current date.	Cannot be set.
day-of-week	Route calls based on the current day of	Cannot be set.
	week.

Besides the header (name, input and output-type) a mapping table contains multiple entries. Each entry speci- fies a specific value of the routing table input-type and a value that shall be applied to the call property specified with the output-type of the table. When a call arrives a mapping table, the following procedure is applied:

1.Examine the call property as specified with the mapping table input-type.

2.Select the best matching entry. This means that the key of each of the entries is compared to the call prop- erty and the entry that matches best is chosen.

3.Execute the entry. This means replacing the property specified with the output-type of the mapping table with the value of the selected entry.

Call router configuration task list 483