Patton electronic SmartNode 4110 Series manual Example Remove an entire mapping table

SmartWare Software Configuration Guide 40 • Call router configuration

Example: Remove entries from a mapping table

The running-config shows the following table:

mapping-table called-e164 to called-e164 MY-TABLE map 10 to 20

map 11 to 21 map 12 to 22 map 13 to 23

To remove the first two entries from the table enter the following commands:

node(cfg)#context cs node(ctx-cs)[switch]#mapping-table MY-TABLE node(map-tab)[MY-TABLE]#no map 10 node(map-tab)[MY-TABLE]#no map 11

The resulting running-config is:

mapping-table called-e164 to called-e164 MY-TABLE map 12 to 22

map 13 to 23

Procedure: To delete an entire mapping table

Mode: Context CS

Step	Command	Purpose
1	node(ctx-cs)[switch]#no mapping-	Delete the mapping table table-name.
	table table-name	Note: You do not have to enter the type of the table when
		just deleting it. The type must only be specified when creating
		a table.

Example: Remove an entire mapping table

node(cfg)#context cs node(ctx-cs)[switch]#no mapping-table MY-TABLE

Creating complex functions

Complex functions allow combining mapping tables, which need to be executed in sequence. This is useful if, for example, the calling and the called party number have to be modified in the same step. Complex function names can be any arbitrary string.

Procedure: To create a complex number manipulation function

Call router configuration task list 490