Patton electronic SmartNode 4110 Series manual Default Any other unhandled case Mode context cs

SmartWare Software Configuration Guide 40 • Call router configuration

•default: Any other unhandled case

Mode: context cs

Step	Command	Purpose
1	[name] (ctx-cs)[router]# routing-table	Creates a redirect reason routing table.
	calling-redir-reason <table-name>

Both the redirecting-number and the redirect-reason can also be used in any call-router mapping tables.

Time of day routing table

The time table is used to route calls based upon the current system time during one day, i.e. an 24hr. period from midnight to midnight. Times are matched within the ranges defined in the time routing table.

The key parameter of the routing table entry has the format: hh:mm:ss-hh:mm:ss

The full range must be specified. The range must not cross a day boundary at midnight.

Example: Time of day routing table

node(cfg)#context cs node(ctx-cs)[switch]#routing-table time WORKDAY

node(rt-tab)[WORKDAY]#route 08:00:00-16:59:59 dest-table TAB-BEST-QUAL node(rt-tab)[WORKDAY]#route 17:00:00-20:59:59 dest-interface IF-VOIP-A node(rt-tab)[WORKDAY]#route 21:00:00-23:59:59 dest-interface IF-VOIP-B node(rt-tab)[WORKDAY]#route 00:00:00-07:59:59 dest-interface IF-VOIP-B

Day of Week Routing Table

The day-of-week table is used to route calls according to the day of the week. The days are defined by the long lowercase names monday; tuesday; wednesday; thursday; friday; saturday; and sunday. To configure weekday routing table entries use the following commands starting in the CS context configuration mode.

Example: Day of week routing table

node(cfg)#context cs node(ctx-cs)[switch]#routing-table day-of-week TAB-DAY node(rt-tab)[TAB-DAY]#route saturday dest-table TAB-LEAST-COST node(rt-tab)[TAB-DAY]#route sunday dest-table TAB-LEAST-COST node(rt-tab)[TAB-DAY]#route default dest-interface IF-VOIP

Date routing table

The date table is used to route calls according to the current system date. It can be used, for example, to repre- sent holidays in the routing decision tree. The table matches exact dates or date ranges.

The key parameter of the routing table entry has the format: dd:mm:yyyy-dd:mm:yyyy

The full range must be specified.

Example: Date routing table

node(cfg)#context cs node(ctx-cs)[switch]#routing-table day-of-week HOLIDAY2001

node(rt-tab)[HOLIDAY~]#route 01.01.2001-02.01.2001 dest-table TAB-HOL node(rt-tab)[HOLIDAY~]#route 05.01.2001-05.01.2001 dest-table TAB-HOL node(rt-tab)[HOLIDAY~]#route 24.12.2001-31.12.2001 dest-table TAB-HOL

Call router configuration task list 479