Patton electronic SmartNode 4110 Series manual Calling-e164

SmartWare Software Configuration Guide 40 • Call router configuration

	Table 17. Routing table types (Continued)
Type	Description
calling-e164	Route calls based on the calling party E.164 number. Entries of calling-e164 tables can
	use wildcards to summarize routes.
called-type-of-number	Route calls based on the called party number type. ISDN distinguishes different type of
	numbers.
calling-type-of-number	Route calls based on the calling party number type. ISDN distinguishes different type of
	numbers.
called-numbering-plan	Route calls based on the called party numbering plan. ISDN distinguishes different
	numbering plans.
calling-numbering-plan	Route calls based on the calling party numbering plan. ISDN distinguishes different
	numbering plans.
called-name	Route calls based on the display name of the called party.
calling-name	Route calls based on the display name of the calling party.
called-ip	Route calls based on the signaling IP address of the destination VoIP peer.
calling-ip	Route calls based on the signaling IP address of the origination VoIP peer.
called-uri	Route calls based on the URI of the destination VoIP peer (for SIP calls: the To-URI).
calling-uri	Route calls based on the URI of the origination VoIP peer (for SIP calls: the From-URI).
calling-pi	Route calls based on the presentation indicator.
calling-si	Route calls based on the screening indicator.
itc	Route calls based on the information transfer capability (bearer capability) to distin-
	guish speech from data calls.
time	Route calls based on the current time of day. .
date	Route calls based on the current date.
day-of-week	Route calls based on the current day of week.

Besides the header (name and type) a routing table contains multiple entries. Each entry specifies a specific value of the routing table type and a destination interface and an optional function. When a call arrives at a routing table, the following procedure is applied:

1.Examine the call property as specified with the routing table type.

2.Select the best matching entry. This means that the key of each of the entries is compared to the call prop- erty and the entry that matches best is chosen.

3.Execute the entry. This means executing the referenced function of the entry if specified, and routing the call to the specified destination interface, table or service.

Procedure: To create a routing table and add entries

Call router configuration task list 465