Patton electronic SmartNode 4110 Series manual Display time since last restart, De en, Number

SmartWare Software Configuration Guide 7 • Basic system management

Display time since last restart

This procedure describes how to display the time since last restart

Mode: Operator execution

Step	Command	Purpose
1	node>show uptime	Display the time since last restart.

Example:

The following example shows how to display the uptime of your device, if you start from the configuration mode.

node>show uptime

The system is up for 54 days, 23 hours, 44 minutes, 18 seconds

Configuring the Web server

The embedded web server has two parameters that are configurable.

Note Changing the language parameter does not affect the language of the web configuration pages.

Mode: Configure

Step	Command	Purpose
1	node(cfg)#webserver language	Sets the language to either German (de) or English (en).
	{de en}
2	node(cfg)#webserver port port-	Sets the listening port number in the 1 to 65535, default
	number	port number for the web server is 80.

Example: Configuring and starting the Web server

The following example shows how to set the web server language and the listening port of your device, if you start from the configuration mode.

node(cfg)#webserver language en node(cfg)#webserver port 80

Determining and defining the active CLI version

SmartWare allows having a number of CLI version installed together, whereas only one CLI version is acti- vated. There are commands available to determine the currently running CLI version and if necessary switch to another CLI version. The idea of having several CLI version available on a system is mostly to offer reduced or enhanced command sets to users.

Mode: Configure

Step	Command	Purpose
1	node(cfg)#show version cli	Displays the currently running CLI version
2	node(cfg)#cli version version.revision	Selects the active CLI version in the form version.revi-
		sion

Basic system management configuration task list 96