Patton electronic SmartNode 4110 Series manual Radius configuration

SmartWare Software Configuration Guide 8 • RADIUS Client Configuration

node(pf-auth)[remote-~]#exit node(cfg)#

node(cfg)#profile authentication local-only node(pf-auth)[local-o~]#method local node(pf-auth)[local-o~]#method none node(pf-auth)[local-o~]#exit

node(cfg)#terminal Telnet use authentication remote-radius node(cfg)#terminal console use authentication local-only node(cfg)#show profile authentication

Authentication Profile: default Server-Timeout: 10 Methods:

local (Type=local) none (Type=none)

Authentication Profile: remote-radius Server-Timeout: 15

Methods:

radius_deepblue (Type=radius) radius_extern (Type=radius) local (Type=local)

Authentication Profile: local-only Server-Timeout: 10

Methods:

local (Type=local) none (Type=none)

node(cfg)#

Possible lock-out—If you delete the local and none methods from the default AAA profile, or if you create and use a profile

without methods local and none, you will be unable to access IMPORTANT your device if the network or RADIUS server is not available.

Note If you do not configure AAA, a default AAA profile exists containing the

AAAlocal as the first AAA method and the AAA none as the second. The Tel- net login and the console login service use this profile. If an emergency occurs, you can reload this default configuration by reloading the factory configuration as described in section “Boot procedure” on page 74.

RADIUS configuration

RADIUS is a protocol for carrying authentication, authorization, and configuration information between a network access server (NAS) that desires to authenticate its links and a shared authentication server. A NAS operates as a client of RADIUS. The client is responsible for passing user information to designated RADIUS servers and then acting on the response that is returned. RADIUS servers are responsible for receiving user con- nection requests, authenticating the user, and then returning all configuration information necessary for the client to deliver service to the user.

RADIUS configuration 106