Patton electronic SmartNode 4110 Series manual Configuring a Realm, Creating credentials

SmartWare Software Configuration Guide 50 • Authentication Service

Configuring a Realm

The following commands add a new Realm to the authentication service. If more than one Realm has to be entered, the order of the list can be modified by using the index and/or before and after keywords. The no form of the command removes an existing Realm from the list.

Mode: Authentication Service

Step	Command	Purpose
1	[node](ls)[name]# [no] realm <name>	Adds or removes a Realm to/from the authentica-
	or	tion service.
	[node](ls)[name]#realm <index> <name>
	or
	[node](ls)[name]#realm before <index>
	<name>
	or
	[node](ls)[name]#realm after <index>
	<name>

Configuring the authentication protocol

The protocol command specifies the authetnication protocol.

Mode: Authentication Service

Step	Command	Purpose
1	[node](ls)[name]#protocol {http}	Specifies the authentication protocol to be used.

Creating credentials

The following command creates Authentication Credentials identified by the entered username. The no form of the command removes an existing Credential. It is possible to enter this command without a password.

Mode: Authentication Service

Step	Command	Purpose
1	[node](ls)[name]# [no] username <user>	Creates or removes authentication credentials.
	[password <password>]

Configuration Examples

authentication-service AUTH_SRV realm 1 voip-public

realm 2 voip-intranet realm 3 ms-exchange

username 433 password fK+bfnzL45Goh/VdjrWxAA== encrypted username john.doe password D60t7CBZ58k7JK2jxdlw4w== encrypted

Configuration Examples 606