Patton electronic SmartNode 4110 Series manual Call outbound face, Mode Call outbound

SmartWare Software Configuration Guide 51 • Location Service

Call outbound face

The call outbound face is used to configure call properties for outgoing calls.

Mode: Identity

Step Command Purpose

1[node](identity)[name]# [no] call out- Adds a new face to the identity. The no form of the

	bound		command removes an existing face with all content
			in it.
Mode: Call outbound
Step		Command	Purpose
1	[node](callout)[name]# [no] use profile		Adds or removes a profile to use if an outgoing
	(siptone-setvoip) <profile>		call destines this identity
Mode: Call outbound
Step		Command	Purpose

1[node](callout)[name]# [no] preferred- Selects which protocol to prefer if an outgoing call

	transport-protocol (tcpudp)	destines this identity.
Mode: Call outbound
Step	Command	Purpose

1[node](callout)[name]# [no] traffic-classSelects which traffic class to set if an outgoing call

		<traffic-class>	destines this identity.
Mode: Call outbound
	Step	Command	Purpose
1	[node](callout)#proxy <host> [<port>]	Adds a new proxy entry to the call outbound face.
		[strict-route]	If the from-uri of a call originating from us matches
		or	the identity for each proxy configured there is a
		[node](callout)#proxy <index> <host>	route-header added. If more than one proxy entry
		[<port>] [strict-route]	has to be entered, the order of the list can be mod-
		or	ified by using the index and/or the insert key-
		[node](callout)#proxy before <index>	words before and after.
		<host> [<port>] [strict-route]
		or
		[node](callout)#proxy after <index> <host>
		[<port>] [strict-route]

Location Service configuration task list 616