Patton electronic SmartNode 4110 Series BRI Debugging, Name#no debug bri, Name#show port bri

SmartWare Software Configuration Guide 17 • BRI port configuration

BRI Debugging

For the investigation of possible problems in link establishment, data transmission or synchronization, there exists a debug command with the options ‘event’ and ‘error’. The command has a hierarchical characteristic and can be applied to all ports on the whole device, or to all ports of slot or just to one specific port. In addi- tion, the ‘show port’ command can be used to printout information about the current configuration and about received and transmitted frames.

Mode: Operator execution

	Step	Command	Purpose
1	[name]#[no] debug bri	Enables/Disables the BRI event/error monitor for the
		[ ( [<slot> [<port>] ] ) [ [event]	device a slot or a port.
		[error] ] ]	Default: no debug bri
			Examples:
			1)[no] debug bri
			Enables/Disables the event and the error monitor for
			all bri ports of the device.
			2)[no] debug bri event
			Enables/Disables the event monitor for all bri ports
			of the device.
			3)[no] debug bri error
			Enables/Disables the error monitor for all bri ports
			of the device.
			4)[no] debug bri 3
			Enables/Disables the event and error monitor for all
			bri ports on slot 3.
			5)[no] debug bri 1 event
			Enables/Disables the event monitor for all bri ports
			on slot 1.
			6)[no] debug bri 2 error
			Enables/Disables the error monitor for all bri ports
			on slot 2.
			7)[no] debug bri 0 0
			Enables/Disables the event and error monitor for the
			bri port 0 on slot 0.
			8)[no] debug bri 1 0 event
			Enables/Disables the event monitor for the bri port 0
			on slot 1.
			9)[no] debug bri 2 0 error
			Enables/Disables the error monitor for the bri port 0
			on slot 2.
Mode: Operator execution
	Step	Command	Purpose
1	[name]#show port bri	Prints information about the specified port with a
		[ [<slot> <port>] [detail <level>] ]	given detail level.

BRI port configuration task list 209