Patton electronic SmartNode 4110 Series manual Creating an identity, Mode Identity

SmartWare Software Configuration Guide 51 • Location Service

and the Context SIP Gateway has more than one transport binding, it is recommended to add the local host addresses as Domain to the appropriated location services.

Mode: Location Service

Step	Command	Purpose
1	[node](ls)[name]# [no] domain <name>	Adds a new domain to the location service. If
	or	more than one domain has to be entered, the
	[node](ls)[name]#domain <index> <name>	order of the list can be modified by using the index
	or	and/or the insert keywords before and after. The
	[node](ls)[name]#domain before <index>	no form of the command removes an existing
	<name>	domain from the list.
	or
	[node](ls)[name]#domain after <index>
	<name>

Creating an identity

An identity represents one of multiple possible addresses over which a user is reachable (e.g. sip:john@inalp.com). Many configuration parameters related to call signaling, which were configured on the gateway or the sip interface, can now be configured per identity. This leads to a huge range of configuration possibilities in the identity.

According to the relationship between an identity and user, there can be many different aspects configured. If you are the user agent for a certain identity, use the outbound faces to specify the behavior when sending requests. If you are not the user agent of an identity but know this identity, then use the inbound faces to con- figure the behavior when this identity sends requests.

When creating an identity, it is important to consider that the name of the identity is always used as user-part when building a sip-uri. The name of the identity is also used when comparing to or matching with a sip-uri.

Mode: Location Service

Step Command Purpose

1[node](ls)[name]# [no] identity <name> Adds a new identity to the location service. The no form of the command removes an existing identity.

Mode: Identity

	Step	Command	Purpose
1	[node](identity)[name]# [no] display-	Adds a display-name to the identity. The no form
		name <display-name>	removes the display-name.
Mode: Identity
	Step	Command	Purpose
1	[node](identity)[name]# [no] phone-con-	Adds a phone-context to the identity. The no form
		text <phone-context>	removes the phone-context.

Location Service configuration task list 609