Patton electronic SmartNode 4110 Series manual Call waiting reminder ring, Drop passive call

Models: SmartNode 4110 Series

1 664
Download 664 pages 15.88 Kb
Page 412
Image 412

SmartWare Software Configuration Guide

35 • FXS interface configuration

 

 

Call waiting reminder ring

If a remote subscriber disconnects the call, the local subscriber will hear the release tone and go on-hook. But, if there is still a pending remote subscriber that has been previously set on hold, the phone rings right after on- hook. If the local subscriber goes off-hook, the user will be connected again with the previously held remote subscriber. It is possible to navigate to the pending held subscriber. As soon as the release tone appears, the local subscriber can touch flash to connect again.

Drop passive call

If the local subscriber hears the call waiting tone that indicates a second incoming call and decides not to dis- turb the current one, the drop passive call feature rejects the waiting call. It can also be used to drop a pending call that has been previously set on hold.

Drop active call

The drop active call service can be used if the local subscriber has an active call and a call previously set on hold. This feature provides the possibility to drop the active call and to switch to the hold one without going on-hook first.

Call toggle

In general, the call toggle feature is used to switch between an active and a passive call. The passive call can either be a call previously set on hold or a waiting call.

Call transfer

The call transfer feature is only available if the second call was originated by the local subscriber. For execution, the local subscriber goes on-hook and the active call and the held call will be transferred together. If the second call was an incoming call, the active call will be dropped and the CWRR will appear to signal a pending hold call. It is possible to disable this service by executing the command no call-transfer on the fxs interface.

Mode: Interface FXS

Step

Command

Purpose

 

 

 

1

[name](if-fxs)[name]#[no] call-transfer

Enables or disables the call transfer feature.

 

 

Default: enabled

 

 

 

FXS supplementary services description

412

Page 412
Image 412
Patton electronic SmartNode 4110 Series manual Call waiting reminder ring, Drop passive call, Drop active call, Call toggle