Patton electronic SmartNode 4110 Series manual Accessing the CLI

SmartWare Software Configuration Guide 4 • Accessing the CLI

192.168.1.1(pf-voip)[default]#codec 3 before 1 192.168.1.1(pf-voip)[default]#showrunning-config

...

profile voip default

codec 1 g723-6k3 rx-length 30 tx-length 30 codec 2 g711ulaw64k rx-length 20 tx-length 20 codec 3 g711alaw64k rx-length 20 tx-length 20 dejitter-max-delay 200

...

Note Succeeding indexes are automatically renumbered.

Example 2: Moving the G.723 codec back position 3

This command moves the G.723 codec from the top to third place. As a result, the other two codecs move up in the list as their indexes are automatically renumbered to accommodate the new third-place codec.

192.168.1.1(pf-voip)[default]#codec 1 after 3 192.168.1.1(pf-voip)[default]#showrunning-config

...

profile voip default

codec 1 g711ulaw64k rx-length 20 tx-length 20 codec 2 g711alaw64k rx-length 20 tx-length 20 codec 3 g723-6k3 rx-length 30 tx-length 30 dejitter-max-delay 200

...

Example 3: Inserting a codec at a specific position in the list.

This command assigns the G.729 codec the index number 1 so the codec appears at the top of the list.

192.168.1.1(pf-voip)[default]#codec 1 g729 tx-length 30 rx-length 30 silence-supression 192.168.1.1(pf-voip)[default]#show running-config

...

profile voip default

codec 1 g729 rx-length 30 tx-length 30 silence-supression codec 2 g711ulaw64k rx-length 20 tx-length 20

codec 3 g711alaw64k rx-length 20 tx-length 20 codec 4 g723-6k3 rx-length 30 tx-length 30 dejitter-max-delay 200

...

Accessing the SmartWare CLI task list 63