Patton electronic SmartNode 4110 Series manual Mode Enable, Displaying the CLI version

SmartWare Software Configuration Guide4 • Accessing the CLI

Mode: Configure

Step	Command	Purpose
1	[name](cfg)#terminal ssh use authentication <AAA	Set the AAA profile which is going to be
	profile name>	used for user authentication. The AAA
		profile “default” is uses as when not
		specified otherwise.
Mode: Enable
Step	Command	Purpose
1	[name]#show ssh	Displays status information of the SSH
		server.
Mode: Enable
Step	Command	Purpose
1	[name]#debug ssh	Prints debug information of the SSH
		server.

Displaying the CLI version

This procedure displays the version of the currently running CLI.

Mode: Operator execution

Step	Command	Purpose
1	node>show version cli	Displays the CLI version

Example: Displaying the CLI version

The following example shows how to display the version of the current running CLI on your device, if you start from the operator execution mode.

node>show version cli CLI version : 3.00

Displaying account information

You can use the show command to display information about existing administrator and operator accounts. This command is not available for an operator account.

The following procedure describes how to display account information:

Mode: Administrator execution

Step	Command	Purpose
1	node#show accounts	Displays the currently-configured administrator and operator
		accounts

Accessing the SmartWare CLI task list 60