Configuration
| Open | Wireless AP can associate with this |
| System | wireless router without WEP |
| mode | encryption. |
|
|
|
|
| You should also set up WEP key in the |
Authentication | Shared Key | "Security" page. Wireless AP |
Type | mode | associated with this wireless router |
|
| should use WEP encryption in the |
|
| authentication phase. |
| Auto | The wireless client can associate with |
| this wireless router by using any one of | |
|
| these two Modes. |
Fragment | Specifies the | maximum size of packet during the |
Threshold | data transition. The lower the values set, the poorer | |
| the performance. | |
RTS Threshold | If the packet size is smaller the RTS threshold, the | |
wireless router will not send this packet by using the | ||
| RTS/CTS mechanism. | |
Beacon Interval | Specifies the period of time for a beacon broadcast. | |
|
| |
| The "Data Rate" is the highest limit for wireless | |
Data Rate | router transmission of data packets. The wireless | |
| router will use the highest possible selected | |
| transmission rate to transmit the data packets. | |
| It defines the length of CRC block in the frames | |
Preamble Type | during the wireless communication. "Short | |
Preamble" is suitable for heavy traffic wireless | ||
| network. "Long Preamble" provides more | |
| communication reliability | |
- 14 -
