MicroNet Technology SP916GK user manual Access Control Setting

WPA Authentication	There are two items, “Enterprise (WPA-Radius)”
Mode	and “Personal (Pre-Shared Key)”. You can select
	the mode by clicking the item.
WPA Cipher Suite	Select the WPA Cipher Suite to be TKIP or AES
WPA2 Cipher Suite	Select the WPA2 Cipher Suite to be TKIP or AES
Pre-Shared key Format	To define the format, select what you need in the
	drop list.
Pre-shared Key	Enter the Pre-shared Key according to the pre-
	shared key format you selected.
Enable Pre-	Mark this checkbox to enable Pre-authentication
Authentication	after selecting Enterprise (RADIUS) WPA 2
	authentication mode
Authentication RADIUS	If you use RADIUS Sever to ensure your security,
Sever	you have to set up the parameters in this item. To
	set up the Port, IP address and Password of your
	RADIUS, enter the Port Number, IP and
	Password.

Click <Apply Change> at the bottom of the screen to save the above configurations. You can now configure other advanced settings or start using the router.

Access Control Setting

To restrict the number of access authentication of stations, set up the control list in this page.

Configuration

Wireless Access Control Mode

Click on the drop list to choose the access control mode. You may select “Allow listed” to allow those allowed MAC addresses or select “Deny Listed” to ban those MAC addresses from accessing to this

- 16 -