3.5 TCP/IP Setting
LAN Interface Setting
This sections cover how to set up the configuration of LAN interface, Private IP of you router LAN Port and Subnet mask for your LAN segment.
Configuration
IP address | The IP of your Router LAN port (Default 192.168.1.1) |
|
|
Subnet Mask | Subnet Mask of you LAN (Default 255.255.255.0) |
|
|
| To give your LAN Client an IP, you have to enable “DHCP |
DHCP Server | Server”. Setting up your client IP manually is necessary |
| when you want to use the router as your client’s default |
| gateway. |
DHCP Client | Specify the DHCP Client IP address range. You can also |
Range | click the “Show Client” button to list the connected DHCP |
| clients. |
802.1d | To prevent from network loops and preserve the quality of |
Spanning tree | bridged network |
|
|
Enable UPnP | Mark this checkbox to allow this router to be recognized |
| by UPnP. |
WAN Interface Setting
This page allows users to configure those parameters for connecting to Internet. You may select the WAN Access Type from the drop list and configure parameters for each mode.
- 18 -
