3.4 Wireless Setup
Wireless Access Point builds a wireless LAN and can let all PCs equipped with IEEE802.11b/g wireless network adaptor to connect to your Intranet. It supports WEP encryption and MAC address filter to enhance the security of your wireless network.
Basic Setting
You can set up the configuration of your Wireless and monitor the Wireless Clients associate with your AP.
Configuration
Disable Wireless | To Disable interface of Wireless LAN |
LAN Interface |
|
|
|
Band | To select a band for this device to match 802.11b, |
| 802.11g or both. |
Mode | Configure this device as AP, WDS or both. |
Network type | When you configure this device in AP mode, this |
| drop list allows users to change the network type |
| into |
SSID | The name of the wireless network |
Country | Select the region you live in. |
Channel Number | The channel used by the wireless LAN. All devices |
| in the same wireless LAN should use the same |
| channel. |
Associated Clients | Click "Show Active Clients" button, then an "Active |
| Wireless Client Table" will pop up. You can see the |
| status of all active wireless stations that are |
| connected to the access point. |
Enable Universal | Mark this checkbox to enable Universal Repeater |
Repeater Mode | Mode which allows this device to act as an AP and |
| client simultaneously. |
SSID of Extended | While you enable the Universal Repeater Mode, |
Interface | you have to specify an SSID for the extended |
| interface. |
- 12 -
