Kentrox AI296 manual Selcnf, Configuration file, Cnf extension

AI296 Version 9.8x User’s Guide

AI296 Commands: selcnf

selcnf



Note: This command is only available for AI296 in standalone mode.

Description

This command has two forms: One allows for the recovery of an overwritten runtime configuration file and the other allows for the deletion of the specified configuration file. Any configuration file (with a .cnf extension) can be used for system boot up. The configuration file is written to boot.ini.

Command Type

shell

Formats

selcnf

-r

-dconfig_file

Parameters

-r	Specifies the option that recovers the current overwritten run-time
	configuration file.
-d	Specifies the option that deletes a configuration file. The following parameter is
	accepted:
	config_file—Defines a configuration file for deletion; it must end with a
	.cnf extension.

Examples

This example displays the available options for command selcnf.

[296]selcnf usage: selcnf -r

	selcnf [-d] <config_file>
Selects the specified config file for current configuration.
Options:
-r	Recovers the current over-written run-time config file
-d	Deletes the specified configuration file
[296]

9-84