Kentrox AI296 manual Alarm group, Self-clearing alarms clear themselves when the problem that

	AI296 Version 9.8x User’s Guide
	AI296 Commands: alarm
-clear	Clears all non-self-clearing alarm groups or a specified non-self-clearing
	alarm group.
	
	Note: Only non-self-clearing alarm groups can be manually cleared.
	Self-clearing alarms clear themselves when the problem that
	caused the alarm is resolved.
	The following parameter is accepted:
	group—Defines the group of alarms to display, clear, mask, or
	unmask. Valid values are existing alarm groups.
-mask	Prevents a specified alarm group from affecting overall alarm severity.
	The following parameter is accepted:
	group—Defines the group of alarms to display, clear, mask, or
	unmask. Valid values are existing alarm groups.
-unmask	Allows a specified alarm group to affect overall alarm severity. The
	following parameter is accepted:
	group—Defines the group of alarms to display, clear, mask, or
	unmask. Valid values are existing alarm groups.

Examples

This example displays a list of the alarm groups and the overall alarm severity.

[296]alarm
Alarm Group Sev		Date & Time		Message (most recent, most severe in group)
----------- ---		-----------		----------------------------------------------
*general	0	00-00	00:00
links	0	06-01	00:00	Link 1 up.
----------- ---		-----------		----------------------------------------------
*not self-clearing			() masked
Overall alarm severity: 0
[296]

9-13