Manuals / Kentrox / Computer Equipment / Computer Hardware

Kentrox AI296 manual Diag-info, Description

Models: AI296

1 404

Download 404 pages 11.96 Kb

Page 295

AI296 Version 9.8x User’s Guide

AI296 Commands: diag-info

diag-info

Description

This command displays diagnostic information for WAN, asynchronous, Ethernet, and TCP connections as well as for memory. Different screens of information can be viewed depending on the command option that is entered. The screens display the state of serial links and system updates once per second. The available display options are W, M, A, E, and T. They display the following information:

zOption W displays WAN diagnostic information. W is the default display.

zOption M displays the STREAMS allocation and memory information.

zOption A displays asynchronous information.

zOption E displays Ethernet information.

zOption T displays TCP data.

Note: Type X to exit the command display.

Command Type

shell

Formats

diag-info

9-37

Image 295

Kentrox AI296 manual Diag-info, Description

Contents

AI296TM Page About this Document Tip Document ConventionsConvention Meaning LabelsIii Ground Caution Proper Cooling Caution Electrostatic Discharge CautionFCC Warning Phone Support Customer AssistanceWeb Site Support Email SupportTable of Contents Exiting the Menu System AI296 Local Menu SystemAI296 Link Types Asynchronous Asynchronous PPP HDLC-Bridge IP Over X.25 Subnet ConfigurationTOC-4 TID Multiplexing Diagnostics for TID MultiplexingAI296 Commands Appendix a AI296 System Codes AI296 Commands AI296 Menu Aliases FTP Sessions Appendix B Standalone Mode and Switch ModeProduct Description Features Link-to-Link Call Routing Performance Monitoring, Maintenance, TroubleshootingRemote and Local Configuration Standalone ConfigurationTID Multiplexing System DiagnosticsAI296 Hardware Components Links 9-12 Connector Links 5-8 ConnectorLinks 13-16 Connector Links 1-4 ConnectorComponent Description Technical SpecificationsDP196 Distribution Panel Individual Port AccessDescription Specification CAB257 CablePin Signal Direction DB-25 ConnectorsDisplays the RJ45 10BaseT connector Pin RJ45 10BaseT ConnectorsAsynchronous to TCP/IP Application Typical ApplicationsIllustrates a common IP over X.25 application IP Over X.25 NetworksAI296 Version 9.8x User’s Guide Mixed Asynchronous and X.25 Network Mixed Asynchronous and X.25 NetworksAI296 Version 9.8x User’s Guide X.25 to TCP/IP Application To TCP/IP ApplicationIllustrates a common X.25 trunking application TrunkingAI296 Version 9.8x User’s Guide Using the AI198TM Menu System Accessing the Menu System Following four types of menu items are available Navigating the Menu SystemMenu Numbering Structure Types of Menu ItemsMenu re-appears with the entered IP address SubmenusToggles DataMenu Item Descriptions FunctionsMenu Item Description Exiting the Menu System AI296 Local Menu System PPP Authentication Protocols PAP and Chap Multilevel User Name and Password SecurityRadius Authentication TACACS+ AuthenticationLogging Into AI296 Using a Telnet Connection for LoginConsecutive failed login attempts Using an Asynchronous Port for LoginNumber of consecutive failed login attempts Accessing the Local Menu System Direction Keys Navigating the Local Menu SystemIdentifying Types of Menu Items Data Entry ItemsToggle Items Send Accessing the Help MenuSave the changes Exiting the Local Menu SystemSystem Configuration Format General System Properties ConfigurationDestination Menu Break Sequence DescriptionMenu Item Type Configuration in the AI198 Menu SystemConfiguration in the AI296 Local Menu System Ethernet Port SettingsToggle for both menu items This menu item sets the FTP server port number FTP PortThis example displays 16 FTP port number set to IP SettingsMenu Item Types Access Menu Passive Link SettingsDefault is No Access the System MenuMinimum value is 25 seconds and the default is 60 seconds This item sets the system prompt value in the CLI System PromptToggle TCP SettingsTo on This item sets the Telnet port value for AI296 Telnet PortThis example displays Telnet Port set to Server Settings Radius ConfigurationEnabled FALLBACK. The default is Disabled To configure the shell/FTP Radius option Access MenuShell/FTP Options Enabled TACACS+ Configuration Shell/FTP Options 00049 Authentication Traps Snmp ConfigurationAI296 Local Menu Item Configuration Data for all menu items Community NamesWriteComm Menu Following example displaysNode Information Contact PersonsSnmp Manager 10.65.32.4 IP Address Settings Static Route ConfigurationInactivity Timeout TID to Modem Mux ConfigurationFollowing are available Initialization String This example displays Inactivity Timeout set toThis example displays Init String set to conn23 Port Bit SettingsToggle for all menu items TID to Route AI296 Local Menu Item Configuration Daylight Savings Time Time ConfigurationSntp Settings Access the Time Menu located under the System Menu SettingsTime Zone IP Over X.25 Subnet Configuration Before Configuration Configuration OverviewLocal IP Address for this Subnet Local SettingsLocal IP Subnet Mask Local X.25 Link Number This menu item configures the local IXE doorway link numberRemote IP Address for this Subnet Remote SettingsRemote X.121 Address 93.67.158.56 Link Configuration Asynchronous PPP AI296 has six configurable link typesAI296 Link Types AsynchronousSynchronous PPP HDLC-BridgeSee Also BX.25 Configuration Values Usage BX.25 ConfigurationDefault is Enabled BX.25 Modulo BX.25 Support This example displays BX.25 Support set to Enabled BX.25 Timer Settings00033 Link Type Availability Connect Options ConfigurationAccess Menu For 02 Alias, enter 2, and the alias name AliasThis example displays 02 Alias set to async.4.1 Call Retry IntervalThis example displays 03 Call retry interval set to Connect StringWhen Is on Connection SettingsConnection settings are configured using three menu items Default is OFF00030 Link Application Destination AppAlias Disconnect Inactivity Timer Settings Disconnect Options ConfigurationDisconnect inactivity timer when the link receives a call Off. The default is On This example displays Select on or OFF. The default is on This example displaysIs Off Disconnect settings are configured using two menu items Disconnect SettingsDefault is on Disconnect String Disconnect Auto Disable Error Limit General Link Properties ConfigurationAsync, AsyncPPP, HDLC-Bridge, MLT, SyncPPP, Async and AsyncPPP Flow ControlHardware Interface Interface Type Access the Link MenuThis example displays SW Flow Control set to XonXoff This example displays Interface Type set to Access menu 4.2.11.12.8 for MLT or menu 4.2.11.12.7 for Interface ModeMLT This menu item defines a description for a link Link DescriptionThis example displays Link Description set to New X.25 Link Link ModeLink Number This example displays 05*Link mode set to PassiveLink State This menu item enables or disables a linkThis example displays 01 Link number set to This example displays Link state set to Down Link TypePassive Link with Clocking Default is DisabledThis menu item defines the number of databits in a data byte Port Data BitsThis example displays Port data bits set to Seven Port ParityData in the AI296 local menu system Port SpeedThis example displays Port parity set to Odd This menu item defines the baud rate for a portHdlc Menu 4.2.11.12.5 appearsPort Stop Bits This menu item sets the binary encoding on a port Sync Port EncodingAysnc and AsyncPPP Xon Repeat IntervalThis example displays 10 Xon Repeat interval set to AsyncPPP and SyncPPP General PPP Properties ConfigurationIpcp Address Settings Following menu items are available for PPP configurationIpcp Address Parameters Set to Maximum Unit SettingsFor an Ipcp network control protocol Network Control ProtocolIpcp Frame Settings Lapb Parameters ConfigurationSize set to For Frame Window Size, enter the window size. The default isLapb Timer Settings N2 Retry Counter 150 Modem String Modem Option ConfigurationDialing Time-out Interval This example displays Dialing time-outset to Number of Dial AttemptsThis example displays Number of dial attempts set to Modem Setup MenuLocal Authentication Settings PPP Authentication ConfigurationPAP RAS Option Radius Remote Authentication Settings Chap Quick X.25 Configuration Active Number of PVCs This example displays Number of PVCs set to Packet SettingsToggle for max packet size Data for packet window size 128 256 512 Normal Passive Extended SVC Settings This example displays SVC Low set to 250 and SVC High set to Local AddressThis example displays X121 Local Address set to DTR State Configuration RTS/DTR Lead Control ConfigurationAsync and AsyncPPP and SyncPPP RTS State Configuration Flow Control DTR connect state Off DTR disconnect state Maximum Packet Size Parameters ConfigurationThis example displays Max Packet Size set to Packet Window SizeThis example displays Packet Window Size set to Protocol VersionCounter Settings Default is This example displays Facilities Negotiation Timer Settings 12,90000 Parameters Menu 43729 Virtual Circuit Configuration PVCs are configured using four menu items PVC Configuration SettingsMenu PVC Type LCN Range CallTmr ResetTmr PVC Type Timer Type Range Default For Timer Value, select the timer interval value Passive Reset Timer This example displaysSVC Configuration Settings Menu Item Type 0005 TID Multiplexing Overview AI296 Version 9.8x User’s Guide Configuring the Parent Alias TID Multiplexing ConfigurationMenu appears Values are 1 to Destination TidforAI296 Defines the terminal identifier for AI296 Configuring the Children AliasesDuring the parent alias configuration TIDtid For Alias name, enter Example ConfigurationsYES Alias Edit Menu Alias Name 172.16.1.23#1000 TL1DM.1 Alias Edit Menu Alias Name Response Item Description TID Multiplexing TroubleshootingParameters Normal Response FormatNormal Response Example Error Response FormatError Response Example Diagnostics for TID MultiplexingErrcde AI296 Version 9.8x User’s Guide Alias and Call Routing Configuration AI296 Card B IP address DownstreamIncoming Outgoing CallTocardb X25.2.67891 Call Routing Configuring an Alias in the AI198 Menu SystemAI296 Version 9.8x User’s Guide Configuring an Alias in the AI296 Menu System Alias Edit Menu Arranging Aliases in the Alias Table Configuring an Alias with X.25 Keep-Alive Where Notifies the 296 that this is the X-25 keep-alive featureSource/Destination Protocol Tables Following options are available Asynchronous Source Without Breaks AI198Source Destination Menu Item Information Async 25 SVCOn a CR Asynchronous Source With Breaks AI198Async With Following options are available TL1 Break PacketizedOption X.25 SVC Source Without Breaks AI198Time X.25 SVC Source With Breaks AI198Called Packetizing With async Break Address Async Call data25 PVC Alias name X.25 PVC Source Without Breaks AI19825 PVC 25 SVC Alias name Called Following options are available AddressTCP/IP Source Without Telnet Breaks AI198 25 PVC Async with Alias name25 PVC Async break Called 25 PVC TL1 PAD TL1With Called Async Alias nameTCP/IP Source With Telnet Breaks AI198 With Called Following options are available Break AddressAsync break Called Async with Alias nameAsynchronous Source Without Breaks AI296 Async 25 PVC Alias name Async 25 SVC Alias nameTL1 Break Async Address Packetized Call data 10 Asynchronous Source With Breaks AI296Protocol Async 25 PVC Alias name Async With Called11 X.25 SVC Source Without Breaks AI296 Break Address Caller’s 12 X.25 SVC Source With Breaks AI29614 X.25 PVC Source With Breaks AI296 13 X.25 PVC Source Without Breaks AI29615 TCP/IP Source Without Telnet Breaks AI296 16 TCP/IP Source With Telnet Breaks AI296 Async with Alias name Module Types Protocol Processing ModulesAepx Causes the PAD protocol to reply to X.25 breaks Enables Macstar compatibilityPrevents the PAD protocol from passing breaks upstream Prevents the PAD protocol from passing breaks downstreamSpecify up to 16 characters An X.25 when X.3 parameter 3 is set toProvides packetizing and sets the packetizing timer to To zero, the option is turned offPropagated upstream Carriage return and semi-colonFeed and delete Provides packetizing but prevents breaks from beingTo zero, this option is turned off Provides TL1 packetizing and prevents breaks from passing Provides TL1 packetizing and sets the packetizing timer toSeconds Feed and deleteModule Arguments Module PropertiesEntry Description Comments Start SymbolsAlias Macros Alias Macro ComponentsVariable Value Wildcard SymbolsConstants VariablesOperator Description OperatorsCharacter in a string 20 Alias Macro FunctionsAlias Macro Function Description of Operation Returns the Ascii integer value of the firstXth character and continuing to the right-most end Match any of the expressions, then default is20 Alias Macro Functions Returns characters from string starting withConfiguration Examples Alias Macro Configuration=LA,PA,’#’,1-1=MYIP1 SVC to SVC Connection Alias Configuration ExamplesExamples are given for the following connections TL1 SVC to PVC Connection SVC to PVC Connection DiagramPVC Called address PVC to SVC Connection16.X25.2.3 MLT Call Routing Example MLT RouteMLT6 Link-to-Link Routing Example Menu F1 Help F2 Send F4 Close Ctrl-R Return to Main Menu AI296 Commands Establishing a Local Shell Connection Commands OverviewShell Commands Shell ConnectionsEstablishing a Remote Shell Connection Log/Alarm Message Header Winslc CommandsDisplaying winslc Command Logging Using winslc CommandsHeader Element Description Shell Command TypeAaa FormatsEnable-Enables TACACS+ authentication All-Enables or disables TACACS+ authentication on allAsync-Enables or disables TACACS+ authentication on Disable-Disables TACACS+ authenticationAI296 Version 9.8x User’s Guide AI296 Version 9.8x User’s Guide Examples Command DefaultsAAA Hyphens AlarmFollowing parameters is accepted Unmask. Valid values are existing alarm groups Alarm groupSelf-clearing alarms clear themselves when the problem that Caused the alarm is resolvedThis example displays alarms for links 5-8in group links This example displays all system alarms in group linksThis example displays all alarms by severity level This example displays the unmasking of alarm group links Arp Command TypesColumn Description 296arp -d Mapping for 10.40.53.2 deleted Break 296break 10.40.5.11#1821 Breaking connection 10.40.5.11#1821 This example displays the dumping of the bridge table BridgeExample, 1,2-3 to reset error counters for links 1, 2, CresetTo reset error counters for links 1, 2, Reset error counters for links 1Date Debug This example displays the enabling of all debug data logging This example displays the deletion of file log.txt This command deletes a specified file that resides on AI296Delete Filename Defines the name of the file to deleteDisplay Item Description Diag-connLogic 4 and Pattern 5 are considered This option prompts for the ID of the connection to viewDisplays details for that connection Pattern 1, Logic 2, and Pattern 3 are evaluated beforeDiag-eth Using Interpretation ModeUsing the Help Option Defines the source address MAC, IP, or TCP/UDP Following formats apply to filtersAdds a filter Deletes a filterProtocol filters are MAC/IP address settingsDefines the TCP/UDP port number regardless Adds or deletes a specific protocol filter. AvailableThis example displays Ethernet diagnostic help information Ijkl FF FC This example displays the deletion of all filters This example displays the deletion of filter protocol tcpDiag-info Buffers were available Displays the link numberMeans the X.25 frame level is not established Means the X.25 frame level is establishedDisplays the number of free or available Streams resources Last rebootedRebooted Displays the name of the Streams resourceDisplays the number of bytes coming into the link Connection to be enabledDisplays the state of the driver. Two states are available Specifies that the link is not establishedDisplays the number of short received frames Had CRC errorsDisplays the number of frame length violations Received packetsDisplays the number of times transmitted frames Displays the number of frames received onConnection Displays the number of bytes received onDisplays the number of bytes received on the connection Does not indicate an errorDisplays the number of transmit errors that have occurred Displays the number of frames received on the connectionError is recorded when the following events occur ErrorsDisplays the number of alignment errors Excessive deferral timer is exceeded. An excessive deferralEthernet interface is uninitialized Ethernet interface needs to be resetDisplays the current state of the Ethernet interface. Following values may appearOption Function Diag-lineDiag-line Displayed as Ascii String Only present in data packets, then the data byte count isBaseport Defines the baseport number for AI296 Diag-tconnThis example displays all available files DirThis example displays an exit from the current shell session ExitDefines the name of the file to display This command displays the first few lines of a fileDefines the number of lines to display. The default is HeadHelp This example displays a list of all available commandsThis example displays help information for command show Formats Examples This command displays the current user name and profileThis example displays the current user name and profile This example displays the configured IP address information Ip init Enter IP Address Range default 1 Setting range to 296 Link This example displays the stopping of links 6 This example displays the starting of links 1 through 4Baseport Indicates the baseport number of AI296 This command displays link statistic informationFor the AI296 system command LinkstatC D 9600 RS-232 @AI198154041 072204 Sev=F Base=064 Msg Log This command turns the display of log messages on or offLogout This command closes a shell sessionThis example displays the closing of a shell session This command displays a list of available files Menu This command accesses the AI296 main menu systemThis example displays the AI296 Main Menu More Pad Sets page wait to n lines Resets the current callEnables the transparent mode of operation This example displays the setting of the PAD profileBaseport Defines the AI296 baseport number This command forces AI296 to crash dump and haltPanic WinslcPasswd This command changes an existing user’s passwordPing Pppstatus IP address of AI296 if the link status is Running Displays one of the followingHave write permission Command Type shell FormatsProfile Profilename-Defines the name of a user profileLists all user profile names Newprofile-Defines the name of a new user profileRemoves a user profile. The following parameter is accepted Pvcedit Forces the PVC to become passive This example displays PVC information for link PvclistColumn Description This command resets AI296 ResetThis example displays the resetting of AI296 This example displays AI296 receiving two files from a PC Selcnf Configuration fileCnf extension Sholog PDisplays the content of the file one page at a timeDisplays crash dump information ShowDisplays comments Displays all active connectionsDisplays link data. The following parameters are accepted MAC address when in standalone modeDisplays the default and backup gateway IP address Displays WAN diagnostic informationThis example displays the serial link performance for links This example displays the AI296 version numberStaeia This command displays the status of the EIA leadsLead is negated CTS Standalone This example displays the current standalone mode statusStaslc Displays the number of overrun errors Is asserted and means the signal is negatedDisplays the number of parity errors Displays the number of framing errorsSyncflash Sz filename Tacacs Made to the TACACS+ server This example displays a TACACS+ debug log fileTACACS+ server Displays the number of failed connection attempts that wereConfiguring the time out value, refer to command aaa on Displays the number of errors that occurred when AI296When AI296 attempted to read a packet from the TACACS+ Were received when AI296 attempted to read them fromTacacs server Authen-Enables or disables the authentication phase for Configures the AAA phases that are allowed for specifiedAccount-Enables or disables the accounting phase for All-Enables or disables all AAA phases for the specifiedAssociated servers are enabled + or disabled DisabledDisplays the server numbers. The +/ signs indicate if Servers Displays the TACACS+ shared secrets passwords for specifiedThis example displays the last 10 lines of file userlog.txt This command displays the last few lines of a fileTail Specifies that a line number value will be enteredTcpoutconn Tftp Tftp106 File Downloaded successfully 296 Tftpboot 109 Timezone 111 Trace DefaultPriority Level This example displays the configuration of trace This example displays the traceroute to IP address TracerouteType Defines the file for which you want to view the contentsDisplays text from the file one page at a time Defines the source file to copy UpdateUptime Profilename Permission UseraddDescription of Permissions Profilename Specifies a user who can only execute the following commandsUserdel Users Who Xvc 124 This appendix provides information about AI296 system codes AI296 System CodesStandard Reset Indication Cause Codes Cause Codes and Diagnostic CodesCause Code Description Standard Clear Indication Cause Codes Kentrox-Specific Reset Indication Cause Codes0X1D Reset due to network out of order 0x9B Remote DTE originated resetCcitt Diagnostic Codes Standard ISO Diagnostic Codes0x39 Ship absent 0x7F Registration/cancellation confirmed Cause Code Description Cause Code Description Kentrox-Specific Diagnostic Codes Crash Codes Error Code Description Hexadecimal DecimalCommon Crash Codes AI296 Crash Codes System Failure Crash Reports Kentrox Technical Support AI296 Version 9.8x User’s Guide Standalone Mode and Switch Mode Transfer the software image to AI296 Standalone ModeDownloading Software for a Standalone AI296 At the FTP prompt, open AI296Configuring BOOTP/TFTP Downloading Software for AI296 in Switch Mode Switch ModeAt the FTP prompt, open AI198 Defines the software image file name Transfer the software image to AI198AI296 Version 9.8x User’s Guide Commands for AI296 TACACS+ Server Enhancements Following keyword lets users access destinations AI296 CommandsMenu Menualias AI296 Menu AliasesProvides FTP read access Following AI296 keywords apply to FTP accessFTP Sessions