Manuals / Kentrox / Computer Equipment / Computer Hardware

Kentrox AI296 manual TID to Modem Mux Configuration, Inactivity Timeout, Following are available

Models: AI296

1 404

Download 404 pages 11.96 Kb

Page 78

AI296 Version 9.8x User’s Guide

System Configuration: TID to Modem Mux Configuration

TID to Modem Mux Configuration

The following are available:

zInactivity Timeout

zInitialization String

zPort Bit Settings

zTID to Route

Inactivity Timeout

Description

This menu item defines the amount of time (in seconds) the Modem Mux connection must be inactive before it times out.

Menu Item Types

Data

Configuration in the AI198 Menu System

1.Access Menu 4.2.14-2.6.

2.From Menu 4.2.14-2.6, enter a value from 2 to 11. Menu 4.2.14-2.6.1 appears.

3.For 06 Inactivity Timeout, enter 6, and a timeout value. Valid values are from 0 to 100000. The default is 300.

This example displays 06 Inactivity Timeout set to 1500.

>6,1500
			Menu 4.2.14-2.6.1
01	TID to route--------------------------------------------
02*Port Data Bits (7,		8)------------------------------------------------------	8
03*Port Stop Bits (1,		2)------------------------------------------------------	1
04*Port Parity (None, Even, Odd)-------------------------------------------			None
05	Init String-----------------------------------
06	Inactivity Timeout (0 - 100000)---------------------------------------		001500

AI296 Local Menu Item Configuration

1.Access the TID to Modem Mux Menu located under the System Menu.

2.From the TID to Modem Mux Summary Menu, select [Add TID]. The TID To Modem Mux Edit Menu appears.

3.For Inactivity Timeout, enter a timeout value. Valid values are from 0 to 100000. The default is 300.

4-28

Image 78

Kentrox AI296 manual TID to Modem Mux Configuration, Inactivity Timeout, Following are available

Contents

AI296TM Page About this Document Labels Document ConventionsConvention Meaning TipIii Electrostatic Discharge Caution Ground Caution Proper Cooling CautionFCC Warning Email Support Customer AssistanceWeb Site Support Phone SupportTable of Contents AI296 Local Menu System Exiting the Menu SystemIP Over X.25 Subnet Configuration AI296 Link Types Asynchronous Asynchronous PPP HDLC-BridgeTOC-4 Diagnostics for TID Multiplexing TID MultiplexingAI296 Commands Appendix a AI296 System Codes Appendix B Standalone Mode and Switch Mode AI296 Commands AI296 Menu Aliases FTP SessionsProduct Description Features Standalone Configuration Performance Monitoring, Maintenance, TroubleshootingRemote and Local Configuration Link-to-Link Call RoutingSystem Diagnostics TID MultiplexingAI296 Hardware Components Links 1-4 Connector Links 5-8 ConnectorLinks 13-16 Connector Links 9-12 ConnectorTechnical Specifications Component DescriptionCAB257 Cable Individual Port AccessDescription Specification DP196 Distribution PanelDB-25 Connectors Pin Signal DirectionRJ45 10BaseT Connectors Displays the RJ45 10BaseT connector PinTypical Applications Asynchronous to TCP/IP ApplicationIP Over X.25 Networks Illustrates a common IP over X.25 applicationAI296 Version 9.8x User’s Guide Mixed Asynchronous and X.25 Networks Mixed Asynchronous and X.25 NetworkAI296 Version 9.8x User’s Guide To TCP/IP Application X.25 to TCP/IP ApplicationTrunking Illustrates a common X.25 trunking applicationAI296 Version 9.8x User’s Guide Using the AI198TM Menu System Accessing the Menu System Types of Menu Items Navigating the Menu SystemMenu Numbering Structure Following four types of menu items are availableData SubmenusToggles Menu re-appears with the entered IP addressFunctions Menu Item DescriptionsMenu Item Description Exiting the Menu System AI296 Local Menu System TACACS+ Authentication Multilevel User Name and Password SecurityRadius Authentication PPP Authentication Protocols PAP and ChapUsing a Telnet Connection for Login Logging Into AI296Using an Asynchronous Port for Login Consecutive failed login attemptsNumber of consecutive failed login attempts Accessing the Local Menu System Data Entry Items Navigating the Local Menu SystemIdentifying Types of Menu Items Direction KeysToggle Items Accessing the Help Menu SendExiting the Local Menu System Save the changesSystem Configuration Description General System Properties ConfigurationDestination Menu Break Sequence FormatConfiguration in the AI198 Menu System Menu Item TypeEthernet Port Settings Configuration in the AI296 Local Menu SystemToggle for both menu items FTP Port This menu item sets the FTP server port numberIP Settings This example displays 16 FTP port number set toMenu Item Types Passive Link Settings Access MenuAccess the System Menu Default is NoMinimum value is 25 seconds and the default is 60 seconds System Prompt This item sets the system prompt value in the CLITCP Settings ToggleTo on Telnet Port This item sets the Telnet port value for AI296This example displays Telnet Port set to Radius Configuration Server SettingsEnabled To configure the shell/FTP Radius option Access Menu FALLBACK. The default is DisabledShell/FTP Options Enabled TACACS+ Configuration Shell/FTP Options 00049 Snmp Configuration Authentication TrapsAI296 Local Menu Item Configuration Community Names Data for all menu itemsFollowing example displays WriteComm MenuContact Persons Node InformationSnmp Manager 10.65.32.4 Static Route Configuration IP Address SettingsTID to Modem Mux Configuration Inactivity TimeoutFollowing are available This example displays Inactivity Timeout set to Initialization StringPort Bit Settings This example displays Init String set to conn23Toggle for all menu items TID to Route AI296 Local Menu Item Configuration Time Configuration Daylight Savings TimeSntp Settings Settings Access the Time Menu located under the System MenuTime Zone IP Over X.25 Subnet Configuration Configuration Overview Before ConfigurationLocal Settings Local IP Address for this SubnetLocal IP Subnet Mask This menu item configures the local IXE doorway link number Local X.25 Link NumberRemote Settings Remote IP Address for this SubnetRemote X.121 Address 93.67.158.56 Link Configuration Asynchronous AI296 has six configurable link typesAI296 Link Types Asynchronous PPPHDLC-Bridge Synchronous PPPSee Also BX.25 Configuration BX.25 Configuration Values UsageDefault is Enabled BX.25 Modulo BX.25 Support BX.25 Timer Settings This example displays BX.25 Support set to Enabled00033 Alias Connect Options ConfigurationAccess Menu For 02 Alias, enter 2, and the alias name Link Type AvailabilityCall Retry Interval This example displays 02 Alias set to async.4.1Connect String This example displays 03 Call retry interval set toWhen Default is OFF Connection SettingsConnection settings are configured using three menu items Is on00030 Link Application Destination AppAlias Disconnect Options Configuration Disconnect Inactivity Timer SettingsDisconnect inactivity timer when the link receives a call Select on or OFF. The default is on This example displays Off. The default is On This example displaysIs Off Disconnect Settings Disconnect settings are configured using two menu itemsDefault is on Disconnect String Disconnect General Link Properties Configuration Auto Disable Error LimitAsync, AsyncPPP, HDLC-Bridge, MLT, SyncPPP, Flow Control Async and AsyncPPPAccess the Link Menu Hardware Interface Interface TypeThis example displays SW Flow Control set to XonXoff This example displays Interface Type set to Interface Mode Access menu 4.2.11.12.8 for MLT or menu 4.2.11.12.7 forMLT Link Description This menu item defines a description for a linkLink Mode This example displays Link Description set to New X.25 LinkThis example displays 05*Link mode set to Passive Link NumberThis menu item enables or disables a link Link StateThis example displays 01 Link number set to Link Type This example displays Link state set to DownDefault is Disabled Passive Link with ClockingPort Data Bits This menu item defines the number of databits in a data bytePort Parity This example displays Port data bits set to SevenThis menu item defines the baud rate for a port Port SpeedThis example displays Port parity set to Odd Data in the AI296 local menu systemMenu 4.2.11.12.5 appears HdlcPort Stop Bits Sync Port Encoding This menu item sets the binary encoding on a portXon Repeat Interval Aysnc and AsyncPPPThis example displays 10 Xon Repeat interval set to Following menu items are available for PPP configuration General PPP Properties ConfigurationIpcp Address Settings AsyncPPP and SyncPPPIpcp Address Parameters Maximum Unit Settings Set toNetwork Control Protocol For an Ipcp network control protocolIpcp Lapb Parameters Configuration Frame SettingsFor Frame Window Size, enter the window size. The default is Size set toLapb Timer Settings N2 Retry Counter 150 Modem Option Configuration Modem StringDialing Time-out Interval Number of Dial Attempts This example displays Dialing time-outset toModem Setup Menu This example displays Number of dial attempts set toPPP Authentication Configuration Local Authentication SettingsPAP RAS Option Radius Remote Authentication Settings Chap Quick X.25 Configuration Active Number of PVCs Packet Settings This example displays Number of PVCs set toToggle for max packet size Data for packet window size 128 256 512 Normal Passive Extended SVC Settings Local Address This example displays SVC Low set to 250 and SVC High set toThis example displays X121 Local Address set to RTS/DTR Lead Control Configuration DTR State ConfigurationAsync and AsyncPPP and SyncPPP RTS State Configuration Flow Control DTR connect state Off DTR disconnect state Parameters Configuration Maximum Packet SizePacket Window Size This example displays Max Packet Size set toProtocol Version This example displays Packet Window Size set toCounter Settings Default is This example displays Facilities Negotiation Timer Settings 12,90000 Parameters Menu 43729 Virtual Circuit Configuration PVC Configuration Settings PVCs are configured using four menu itemsMenu PVC Type LCN Range CallTmr ResetTmr PVC Type Timer Type Range Default Passive Reset Timer This example displays For Timer Value, select the timer interval valueSVC Configuration Settings Menu Item Type 0005 TID Multiplexing Overview AI296 Version 9.8x User’s Guide TID Multiplexing Configuration Configuring the Parent AliasMenu appears Values are 1 to Destination Configuring the Children Aliases TidforAI296 Defines the terminal identifier for AI296During the parent alias configuration TIDtid Example Configurations For Alias name, enterYES Alias Edit Menu Alias Name 172.16.1.23#1000 TL1DM.1 Alias Edit Menu Alias Name Normal Response Format TID Multiplexing TroubleshootingParameters Response Item DescriptionError Response Format Normal Response ExampleDiagnostics for TID Multiplexing Error Response ExampleErrcde AI296 Version 9.8x User’s Guide Alias and Call Routing Configuration Call DownstreamIncoming Outgoing AI296 Card B IP addressTocardb X25.2.67891 Configuring an Alias in the AI198 Menu System Call RoutingAI296 Version 9.8x User’s Guide Configuring an Alias in the AI296 Menu System Alias Edit Menu Arranging Aliases in the Alias Table Configuring an Alias with X.25 Keep-Alive Notifies the 296 that this is the X-25 keep-alive feature WhereSource/Destination Protocol Tables Async 25 SVC Asynchronous Source Without Breaks AI198Source Destination Menu Item Information Following options are availablePacketized Asynchronous Source With Breaks AI198Async With Following options are available TL1 Break On a CRX.25 SVC Source Without Breaks AI198 OptionPacketizing With async Break Address Async Call data X.25 SVC Source With Breaks AI198Called TimeCalled Following options are available Address X.25 PVC Source Without Breaks AI19825 PVC 25 SVC Alias name 25 PVC Alias name25 PVC TL1 PAD TL1 25 PVC Async with Alias name25 PVC Async break Called TCP/IP Source Without Telnet Breaks AI198With Called Following options are available Break Address Async Alias nameTCP/IP Source With Telnet Breaks AI198 With CalledAsync with Alias name Async break CalledAsynchronous Source Without Breaks AI296 Async 25 SVC Alias name Async 25 PVC Alias nameAsync With Called 10 Asynchronous Source With Breaks AI296Protocol Async 25 PVC Alias name TL1 Break Async Address Packetized Call data11 X.25 SVC Source Without Breaks AI296 12 X.25 SVC Source With Breaks AI296 Break Address Caller’s13 X.25 PVC Source Without Breaks AI296 14 X.25 PVC Source With Breaks AI29615 TCP/IP Source Without Telnet Breaks AI296 16 TCP/IP Source With Telnet Breaks AI296 Async with Alias name Protocol Processing Modules Module TypesAepx Prevents the PAD protocol from passing breaks downstream Enables Macstar compatibilityPrevents the PAD protocol from passing breaks upstream Causes the PAD protocol to reply to X.25 breaksTo zero, the option is turned off An X.25 when X.3 parameter 3 is set toProvides packetizing and sets the packetizing timer to Specify up to 16 charactersProvides packetizing but prevents breaks from being Carriage return and semi-colonFeed and delete Propagated upstreamTo zero, this option is turned off Feed and delete Provides TL1 packetizing and sets the packetizing timer toSeconds Provides TL1 packetizing and prevents breaks from passingModule Properties Module ArgumentsEntry Description Alias Macro Components Start SymbolsAlias Macros CommentsVariables Wildcard SymbolsConstants Variable ValueOperators Operator DescriptionReturns the Ascii integer value of the first 20 Alias Macro FunctionsAlias Macro Function Description of Operation Character in a stringReturns characters from string starting with Match any of the expressions, then default is20 Alias Macro Functions Xth character and continuing to the right-most endAlias Macro Configuration Configuration Examples=LA,PA,’#’,1-1=MYIP1 Alias Configuration Examples SVC to SVC ConnectionExamples are given for the following connections TL1 SVC to PVC Connection Diagram SVC to PVC ConnectionPVC PVC to SVC Connection Called address16.X25.2.3 MLT Route MLT Call Routing ExampleMLT6 Link-to-Link Routing Example Menu F1 Help F2 Send F4 Close Ctrl-R Return to Main Menu AI296 Commands Shell Connections Commands OverviewShell Commands Establishing a Local Shell ConnectionEstablishing a Remote Shell Connection Using winslc Commands Winslc CommandsDisplaying winslc Command Logging Log/Alarm Message HeaderHeader Element Description Formats Command TypeAaa ShellDisable-Disables TACACS+ authentication All-Enables or disables TACACS+ authentication on allAsync-Enables or disables TACACS+ authentication on Enable-Enables TACACS+ authenticationAI296 Version 9.8x User’s Guide AI296 Version 9.8x User’s Guide Command Defaults ExamplesAAA Alarm HyphensFollowing parameters is accepted Caused the alarm is resolved Alarm groupSelf-clearing alarms clear themselves when the problem that Unmask. Valid values are existing alarm groupsThis example displays all system alarms in group links This example displays alarms for links 5-8in group linksThis example displays all alarms by severity level This example displays the unmasking of alarm group links Command Types ArpColumn Description 296arp -d Mapping for 10.40.53.2 deleted Break 296break 10.40.5.11#1821 Breaking connection 10.40.5.11#1821 Bridge This example displays the dumping of the bridge tableReset error counters for links 1 CresetTo reset error counters for links 1, 2, Example, 1,2-3 to reset error counters for links 1, 2,Date Debug This example displays the enabling of all debug data logging Filename Defines the name of the file to delete This command deletes a specified file that resides on AI296Delete This example displays the deletion of file log.txtDiag-conn Display Item DescriptionPattern 1, Logic 2, and Pattern 3 are evaluated before This option prompts for the ID of the connection to viewDisplays details for that connection Logic 4 and Pattern 5 are consideredUsing Interpretation Mode Diag-ethUsing the Help Option Deletes a filter Following formats apply to filtersAdds a filter Defines the source address MAC, IP, or TCP/UDPAdds or deletes a specific protocol filter. Available MAC/IP address settingsDefines the TCP/UDP port number regardless Protocol filters areThis example displays Ethernet diagnostic help information Ijkl FF FC This example displays the deletion of filter protocol tcp This example displays the deletion of all filtersDiag-info Means the X.25 frame level is established Displays the link numberMeans the X.25 frame level is not established Buffers were availableDisplays the name of the Streams resource Last rebootedRebooted Displays the number of free or available Streams resourcesSpecifies that the link is not established Connection to be enabledDisplays the state of the driver. Two states are available Displays the number of bytes coming into the linkReceived packets Had CRC errorsDisplays the number of frame length violations Displays the number of short received framesDisplays the number of bytes received on Displays the number of frames received onConnection Displays the number of times transmitted framesDisplays the number of frames received on the connection Does not indicate an errorDisplays the number of transmit errors that have occurred Displays the number of bytes received on the connectionExcessive deferral timer is exceeded. An excessive deferral ErrorsDisplays the number of alignment errors Error is recorded when the following events occurFollowing values may appear Ethernet interface needs to be resetDisplays the current state of the Ethernet interface. Ethernet interface is uninitializedDiag-line Option FunctionDiag-line Only present in data packets, then the data byte count is Displayed as Ascii StringDiag-tconn Baseport Defines the baseport number for AI296Dir This example displays all available filesExit This example displays an exit from the current shell sessionHead This command displays the first few lines of a fileDefines the number of lines to display. The default is Defines the name of the file to displayThis example displays a list of all available commands HelpThis example displays help information for command show This command displays the current user name and profile Formats ExamplesThis example displays the current user name and profile This example displays the configured IP address information Ip init Enter IP Address Range default 1 Setting range to 296 Link This example displays the starting of links 1 through 4 This example displays the stopping of links 6Linkstat This command displays link statistic informationFor the AI296 system command Baseport Indicates the baseport number of AI296C D 9600 RS-232 @AI198154041 072204 Sev=F Base=064 Msg This command turns the display of log messages on or off LogThis command closes a shell session LogoutThis example displays the closing of a shell session This command displays a list of available files This command accesses the AI296 main menu system MenuThis example displays the AI296 Main Menu More Pad This example displays the setting of the PAD profile Resets the current callEnables the transparent mode of operation Sets page wait to n linesWinslc This command forces AI296 to crash dump and haltPanic Baseport Defines the AI296 baseport numberThis command changes an existing user’s password PasswdPing Pppstatus Displays one of the following IP address of AI296 if the link status is RunningProfilename-Defines the name of a user profile Command Type shell FormatsProfile Have write permissionNewprofile-Defines the name of a new user profile Lists all user profile namesRemoves a user profile. The following parameter is accepted Pvcedit Forces the PVC to become passive Pvclist This example displays PVC information for linkColumn Description Reset This command resets AI296This example displays the resetting of AI296 This example displays AI296 receiving two files from a PC Configuration file SelcnfCnf extension PDisplays the content of the file one page at a time ShologDisplays all active connections ShowDisplays comments Displays crash dump informationDisplays WAN diagnostic information MAC address when in standalone modeDisplays the default and backup gateway IP address Displays link data. The following parameters are acceptedThis example displays the AI296 version number This example displays the serial link performance for linksThis command displays the status of the EIA leads StaeiaLead is negated CTS This example displays the current standalone mode status StandaloneStaslc Displays the number of framing errors Is asserted and means the signal is negatedDisplays the number of parity errors Displays the number of overrun errorsSyncflash Sz filename Tacacs Displays the number of failed connection attempts that were This example displays a TACACS+ debug log fileTACACS+ server Made to the TACACS+ serverWere received when AI296 attempted to read them from Displays the number of errors that occurred when AI296When AI296 attempted to read a packet from the TACACS+ Configuring the time out value, refer to command aaa onTacacs server All-Enables or disables all AAA phases for the specified Configures the AAA phases that are allowed for specifiedAccount-Enables or disables the accounting phase for Authen-Enables or disables the authentication phase forDisabled Associated servers are enabled + or disabledDisplays the server numbers. The +/ signs indicate if Displays the TACACS+ shared secrets passwords for specified ServersSpecifies that a line number value will be entered This command displays the last few lines of a fileTail This example displays the last 10 lines of file userlog.txtTcpoutconn Tftp Tftp106 File Downloaded successfully 296 Tftpboot 109 Timezone 111 Default TracePriority Level This example displays the configuration of trace Traceroute This example displays the traceroute to IP addressDefines the file for which you want to view the contents TypeDisplays text from the file one page at a time Update Defines the source file to copyUptime Useradd Profilename PermissionSpecifies a user who can only execute the following commands Description of Permissions ProfilenameUserdel Users Who Xvc 124 AI296 System Codes This appendix provides information about AI296 system codesCause Codes and Diagnostic Codes Standard Reset Indication Cause CodesCause Code Description 0x9B Remote DTE originated reset Kentrox-Specific Reset Indication Cause Codes0X1D Reset due to network out of order Standard Clear Indication Cause CodesStandard ISO Diagnostic Codes Ccitt Diagnostic Codes0x39 Ship absent 0x7F Registration/cancellation confirmed Cause Code Description Cause Code Description Kentrox-Specific Diagnostic Codes Error Code Description Hexadecimal Decimal Crash CodesCommon Crash Codes AI296 Crash Codes System Failure Crash Reports Kentrox Technical Support AI296 Version 9.8x User’s Guide Standalone Mode and Switch Mode At the FTP prompt, open AI296 Standalone ModeDownloading Software for a Standalone AI296 Transfer the software image to AI296Configuring BOOTP/TFTP Switch Mode Downloading Software for AI296 in Switch ModeAt the FTP prompt, open AI198 Transfer the software image to AI198 Defines the software image file nameAI296 Version 9.8x User’s Guide Commands for AI296 TACACS+ Server Enhancements AI296 Commands Following keyword lets users access destinationsAI296 Menu Aliases Menu MenualiasFollowing AI296 keywords apply to FTP access Provides FTP read accessFTP Sessions