AI296 Version 9.8x User’s Guide

AI296 Commands: link

link

Description

This command is used to:

zForce a serial link to connect or disconnect



Note: When this command is used to disconnect a serial link, all calls are torn down. The serial link does not come back online until command link start is issued.

Important: If you are connected to the AI296 shell using a serial port, remember not to disable that port or else loss of connectivity will result.

zRestart a link, which is a stop followed by a start

zShow a configuration summary for a link or range of links.

Command Types

shell and winslc

Formats

For the shell command:

link { link_range * } { restart start stop }

For the winslc command:

winslc baseport link { link_range * } { start stop restart }

Parameters

*Specifies all links.

baseport

Defines the baseport number for AI296.

link_range

Defines a link or range of links. Valid values are 1 to 32. Individual

 

values are separated by commas (,) and hyphens (-). For example,

 

1,4-6specifies links 1, 4, 5, and 6.

 



 

Note: This parameter applies to any action the user is trying

 

perform (start, stop, restart, or show information).

restart

Restarts the serial links.

start

Enables the serial links.

stop

Disables the serial links.

9-59

Page 317
Image 317
Kentrox AI296 manual Link