Kentrox AI296 manual Pad

AI296 Version 9.8x User’s Guide

AI296 Commands: pad

pad

Description

This command calls an X.25 PAD host. It is used with the X.3, X.28 and X.29 protocols. Used with a link number, it calls the X.25 device connected to that link. Without parameters, it enters the command mode.

Command Types

shell

Formats

pad



Note: There are several parameters available with this command. See the list below.

Parameters

break	Sends a break signal to host.
breakaction	Sets a breakaction.
breakin	Sets a PAD recall character.
call host	Sets up a connection to the named host.
clear	Closes the current connection.
echo	Enables/disables terminal echo.
emask	Sets the terminal echo mask to n.
flow	Enables/disables terminal flow control.
forward	Sets data forwarding conditions.
help	Displays help information.
hosts	Lists all the available hosts.
int	Sends an interrupt packet.
lfinsert	Sets line feed insertion action.
loghost	Displays X.29 messages.
message	Enables the message mode of operation.
native	Enables the native mode of operation.

9-69