Kentrox AI296 manual Displays the state of the driver. Two states are available

AI296 Version 9.8x User’s Guide

AI296 Commands: diag-info

Column	Description
USED_HWM	Displays the highest number of bytes allocated since the card was last
	rebooted.
UNIT_SIZE	Displays the size in bytes of the memory units that can be allocated.

This example displays diagnostic information for asynchronous connections, which is accessed by typing A.

			ASYNC DIAG	INFO
LINK	STATE	BYTES_IN	BYTES_OUT		LINK	STATE	BYTES_IN	BYTES_OUT
1	1	0		0	16	0	0	0
2	1	0		0	17	0	0	0
3	1	0		0	18	0	0	0
4	0	0		0	19	0	0	0
5	0	0		0	20	0	0	0
6	0	0		0	21	0	0	0
7	0	0		0	22	0	0	0
8	0	0		0	23	0	0	0
9	0	0		0	24	0	0	0
10	0	0		0	25	0	0	0
11	0	0		0	26	0	0	0
12	0	0		0	27	0	0	0
13	0	0		0	28	0	0	0
14	0	0		0	29	0	0	0
15	0	0		0	30	0	0	0
16	0	0		0	31	0	0	0
17	0	0		0	32	0	0	0
Enter M-emory, A-sync, E-thernet,				T-cp or Q-uit:

Column	Description
LINK	Displays the link number.
STATE	Displays the state of the driver. Two states are available:
	z 0 specifies that the link is not established.
	z 1 specifies that the link is enabled. The link does not have to have a
	connection to be enabled.
BYTE_IN	Displays the number of bytes coming into the link.
BYTE_OUT	Displays the number of bytes going out of the link.

9-40