Kentrox manual AI296 Version 9.8x User’s Guide

AI296 Version 9.8x User’s Guide

Alias and Call Routing Configuration: Call Routing



Note: The alias name may include leading, trailing, or embedded wildcard matching characters. You may enter an asterisk (*) which replaces zero or more characters, a question mark (?) which replaces one character, or an alias macro that starts with an equal sign (=).

For information on acceptable alias naming elements and conventions, refer to section Source/Destination Protocol Tables for the AI198 Menu System on page 8-12.

5.To access menu 02+Simple alias translation, enter 2. Menu 8.2 appears:

>2

Menu 8.2

01 Simple alias translation

02 Multiplexed connection

03 Multiplexed only translation

04 SLC routing translation

21 Exit this menu with no changes

Enter item number and optional ",value" then push <CR> key

>

6.To select 04 SLC routing translation, enter 4. Menu 8 reappears with the SLC routing translation configuration items.

Important: Menu item 04 SLC routing translation is the only valid menu item for AI296. Use SLC routing translations to route calls through cards that support non-time division subchannel (TDS) connections.

7.(optional) If you are routing calls between two AI296 cards, enter 3, and the IP address of the remote AI296.

8.For 04 Called address -, enter 4, and the the called (destination) address.

The called (destination) address defines the phone number being called. Maximum length is 14 characters. The actual address or an alias macro can be entered here.

8-6