AI296 Version 9.8x User’s Guide

AI296 Commands: timezone

timezone



Note: This command is only available when AI296 is in standalone mode.

Description

This command displays or changes the time zone or adjusts the time to reflect daylight savings.

Command Type shell

Formats

timezone

-dstoff [ { + - } hh:mm ]

-dston[ { + - } hh:mm ]

Parameters

-dstonEnables daylight savings time for AI296. The following parameters are accepted:

z +—Specifies that the value is east of UTC. z -—Specifies that the value is west of UTC.

z hh—Defines the number of hours from UTC (Universal Coordinated Time or Greenwich Mean Time).

z mm—Defines the number of minutes from UTC (Universal Coordinated Time or Greenwich Mean Time).

-dstoffDisables daylight savings time for AI296. The following parameters are accepted:

z+—Specifies that the value is east of UTC.

z-—Specifies that the value is west of UTC.

zhh—Defines the number of hours from UTC (Universal Coordinated Time or Greenwich Mean Time).

zmm—Defines the number of minutes from UTC (Universal Coordinated Time or Greenwich Mean Time).



Note: For +/-, enter the direction (+ = east) (- = west) of Universal Coordinated Time

(UTC) or Greenwich Mean Time.

The time entered here is the number of hours from UTC. For example, if the desired location is in the Eastern Standard Time (EST) zone, enter -05:00 in this field. This indicates a time 5 hours behind UTC.

9-110

Page 368
Image 368
Kentrox AI296 manual Timezone, Command Type shell Formats