Kentrox AI296 manual Disconnect Options Configuration, Disconnect Inactivity Timer Settings

AI296 Version 9.8x User’s Guide

Link Configuration: Disconnect Options Configuration

Disconnect Options Configuration

Disconnect options configure the parameters that are used when AI296 disconnects. These options are available for asynchronous and asynchronous PPP links. The following configuration items are available:

zDisconnect Inactivity Timer Settings

zDisconnect Settings

zDisconnect String

Disconnect Inactivity Timer Settings

Description

The disconnect inactivity timer settings are configured using three menu items:

zDisconnect inactivity timer—Defines an inactivity timer value. This value establishes a timeout interval after which the link will automatically disconnect if no data has been sent or received for the specified number of seconds. This value only applies to incoming calls on links that have a retry interval timer setting of 0 and a link application setting of LOGIN or ALIAS (AppAlias).



Note: The Disconnect inactivity timer option must be set to a value greater than 0 for the inactivity timer to function.

zInactivity timer enabled when link receives call—Enables or disables the

disconnect inactivity timer when the link receives a call.

zInactivity timer resets on incoming characters from destination—When enabled,

incoming characters count as activity on a link (the inactivity timer resets). When disabled, they do not count (the inactivity timer does not reset).

Menu Item Type

Data for disconnect inactivity timer

Toggle for Inactivity timer enabled when link receives call and Inactivity timer resets on incoming characters from destination

Link Type Availability

Async

Configuration in the AI198 Menu System

1.Access Menu 4.2.11.12.12.

2.For 04 Disconnect inactivity timer, enter 4, and the timer value. The default is 0.

6-18