Kentrox AI296 manual Diag-conn, Display Item Description

AI296 Version 9.8x User’s Guide

AI296 Commands: diag-conn

diag-conn

Description

This command displays a list of enabled links along with connection information for each link. Data can be displayed continuously, one page at a time, or sent to the screen one time only for all connections. The default mode is a continuous display.

Command Type

shell

Formats

diag-conn

Examples

This example displays existing connections across AI296.

C O N N E C T I O N S Mode: Continuous [Search Inactive]

103.	ASY.1.1	[ Idle	]
113.	TCP 172.16.2.9#1032	<--Data	Transfer-->	SHELL

Enter S-kip, I-nternal, A-ll, M-ore, D-etail, F-ind, P-revPg, N-extPg or Q-uit:



Note: For explanations of the states shown, such as idle and data transfer, refer to section pvclist on page 9-80.

Display Item	Description
S-kip	This option bypasses connections. It gives a prompt for the number
	of connections to skip.
I-nternal	This option toggles between I-nternaland H-ide Int. I-nternal
	displays all the internal loopback connections along with other
	connections.
A-ll	This option displays all connections without page breaks. The
	display does not show duplicate connections. For example, if
	connection number 15 is connected to 30, the connection from 30
	to 15 will not appear.
M-ore	This option toggles between M-oreand L-ess. It displays the link and
	PVC number for X.25 PVCs, the link and X.121 addresses for X.25
	SVCs, and the alias used to make the connection.

9-27