AI296 Version 9.8x User’s Guide

Link Configuration: Virtual Circuit Configuration

2.Enter a value (02 through 15) associated with the PVC to be configured. Menu 4.2.11.12.9.2.1 (the PVC Edit Menu) appears.

>3

 

 

 

 

 

 

Menu 4.2.11.12.9.2.1

01*PVC

Type (Passive, Active, Connect on activity)

----------------------Passive

02

LCN

Low (* for all LCNs for the link)-----------------------------------

0001

03

LCN

High----------------------------------------------------------------

0001

04

RESET Timer Interval (seconds)-----------------------------------------

00000

20

Save the changes made

 

21

Exit this menu with no changes

 

Enter item number and optional ",value" then push <CR> key

>

3.For 01*PVC Type, enter 1 to select Passive, Active, or Connect on activity. The default is Passive.

4.For 02 LCN Low, enter 2, and the minimum LCN value. Valid values are 1 to 1024.

The default is 1.



Note: An asterisk (*) configures all LCNs for the link with values defined in menu item 4.2.1114.12.9.1.

5.For 03 LCN High, enter 3, and the maximum LCN value. Valid values are 1 to 1024. The default is 1.

6.For 04 RESET Timer Interval, enter 4, and the reset timer interval value.

The timer type, range, and default settings depend on the PVC type. Refer to Table 6-1 for PVC types, timer types, ranges, and defaults.

Table 6-1 PVC and Timer Type

PVC Type

Timer Type

Range

Default

 

 

 

 

Active

Call Timer

30 to 600 s

30 s

 

 

 

 

Connect on Activity

Inactivity Timer

1 to 600 s

1 s

 

 

 

 

6-88

Page 182
Image 182
Kentrox AI296 manual PVC Type Timer Type Range Default