29
Positioning the Logs
If the gas logs have been factory installed they should not need to be positioned.
If the logs have been packaged separately, refer to the installation instructions that accompany the logs.
Save the log instructions with this manual.
If sooting occurs, the logs might need to be repositioned slightly to avoid excessive flame impingement.
Placing the Ember Material
Two separate bags of ember material are shipped with this gas fireplace:
•The bag labeled Golden Ember
•The bag labeled Glowing Ember
To place the ember material:
•Remove the wing nuts and glass clips or tension springs around the glass door.
•Remove the glass door from the unit.
•Cover the top of the burner with a single layer of ember material. Then sprinkle
•Save the remaining ember materials for use during fireplace servicing.
•Replace the glass door and a front trim door on the unit (see Replacement Parts Section of the manual.)
•Replace the wing nut, glass clips, and tension springs.
•Hand tighten the wing nuts.
