Step 3
Installing the
Vent System
A. Vent System Approvals
These appliances are approved to use
NO OTHER VENTING SYSTEMS OR COMPONENTS MAY BE USED. Detailed installation instructions are included with each vent termination kit and should be used in conjunction with this Installers Guide. The drawing below shows vent system components and terminations.
Identifying Vent Components
The vent systems installed on this gas fireplace may include one, two, or three 90° elbow assemblies. The relationships of vertical rise to horizontal run in vent configurations using 90° elbows MUST BE strictly adhered to. The rise to run relationships are shown in the venting drawings and tables. Refer to the diagrams on the next several pages.
Vent system | Vent system components |
| |
termination kits |
|
Figure 4. Vent Components and Terminations
6
