Table of Contents | Heat & Glo LifeStyle 6000 XLS, 6000 GDVFL

Safety and Warning Information		i
Section 1: Approvals and Codes		1
Approval Listings and Codes		1
Appliance Certification		1
Installation Codes		1
High Altitude Installations		1
Section 2: Getting Started		2
Introducing the Heat-N-Glo Gas Fireplaces		2
Pre-installation Preparation		2
Section 3: Installing the Fireplace		5
Step 1	Locating the Fireplace	5
Step 2	Framing the Fireplace	6
Step 3 Installing the Vent System		7
A. Vent System Approvals		7
B. Installing Vent Components		13
C. Vent Termination		18
Step 4 Positioning, Leveling, and
	Securing the Fireplace	23
Step 5 The Gas Control Systems		23
Step 6 The Gas Supply Line		24
Step 7	Gas Pressure Requirements	25
Step 8	Wiring the Fireplace	26
Step 9	Finishing	28
Step 10	Installing Trim, Logs, and
	Ember Material	29
Installing the Trim		29
Positioning the Logs		30
Placing the Ember Material		30
Step 11 Before Lighting the Fireplace		32
Step 12	Lighting the Fireplace	32
After the Installation		32
Section 4: Maintenance and Servicing		33
Section 5: Replacement Parts
	and Accessories	35
Replacement Parts		35
Accessories		38

Table of Contents

ii

Image 3

Heat & Glo LifeStyle 6000 XLS, 6000 GDVFL manual Table of Contents, Replacement Parts

Contents

Heat-N-Glo Fireplace Safety and Warning Information Replacement Parts Table of Contents Codes Installation CodesHigh Altitude Installations Approvals and Codes Getting Started Diagram of the6000 Series Fireplace Installing the FireplaceStep Locating Step Framing Fireplace Model Models26-1/4 Vent System Approvals Step Installing Vent System DV-90D Corner Installation Venting with One 90 Elbow Venting with Two 90 Elbows Venting with three 90 elbows Attach the First Vent Component to the Starting Collars Installing Vent Components Continue Adding Vent Components Adding Venting Components Install Support Brackets Installing Support Brackets 4. Install Firestops 12 Hole and Vent Pipe 11 Hole and New Framing Members Attic Firestop Vent Termination Round and Trapezoid Termination Caps If Exterior Walls are Finished with Major U.S. Building Codes Minimum Height from Roof to Lowest Discharge Opening Direct Spark Ignition DSI System Step Positioning Leveling, Securing FireplaceStep Gas Control Systems Standing Pilot Ignition System Mm hook-up at the unit Step Gas Supply Line Pressure Natural Gas Propane Step Gas Pressure Requirements Remote Wall Switch Step Wiring FireplaceFor Standing Pilot Ignition Wiring Optional Accessories Fan Wiring Diagram For Direct Spark Ignition DSI Wiring Step Finishing Direct Spark Ignition DSI Wiring Diagram Step Installing Trim Logs, Ember Material Installing the TrimHearth Extensions Positioning the Logs Save the log instructions with this manualPlacing the Ember Material Glass Assembly Double-check for gas leaks Step Before Lighting Fireplace After InstallationReview safety warnings and cautions Double-check for faulty components Maintaining and Servicing Your Fireplace Fireplace Maintenance Burner Flame Patterns Standing Pilot Only Replacement Parts Accessories DSI Ignition Only Both Standing Pilot and DSI Ignition 20 X6000XLS 20 X Models Mesh